Severe stability issues on my local network
Severe stability issues on my local network
Hello Hivemind 🙃
i need some advice here as i am losing my mind.
I have a Fritz!Box6591 and 1Gbit/s internet. Now since yesterday my complete network is extremely unstable. IF i can get any connection, it's as fast as it should be. But connections break down within minutes.
If i let the network "rest" for a couple minutes with barely no activity, i can then access everything perfectly fine for a few minutes until everything breaks down again.
What i did:
-Deactivated my local DNS (AdGuard) on my router -Restarted (even with 15 min. of no power) EVERYTHING. Literally everything in my homenetwork.
Since it's not only the internet connection and not one specific device and not even one specific type of connection (two WiFi Devices can't properly connect between each other just as two different LAN Devices on either different Ports on the router or same router port on a switch) i don't really know what to do anymore.
Obviously my router is the only common denominator but i can't see any issues with it. It's not overheating, it's RAM & CPU usage is perfectly fine, it's not gone it powersaving mode, it doesn't throw me any errors.
I already did tracepath's to every device and there is no unexpected hop on some theoretical phantom device (if my DNS became buggy or something).
If i ping one of my servers from my PC. It says i have a latency of 1~3ms but it is obviously hanging really hard. It could have a delay of 15 seconds before the next line in ping appears but that will still claim it had a 2ms latency.
I don't know what to do anymore and where to begin. Any ideas?
EDIT: Here is quick sketch of my network
EDIT2: Found the culprit - https://lemmy.dbzer0.com/comment/324192
Alright - i found the culprit.
My Sonos speaker on switch 1 was kinda DDoS'ing me... apparently thats a know issue aswell. It flooded my network with requests and probably looped back on itself.
Well, now they are offline, my network is functional and as soon as i have time i will see what i can do about them. Probably factory reset.
I would try to do it systematically. At my dad's we had a similar problem but not the same and there it was that my dad by accident created a loop in one of the switches.
I would start with turning off the wifi and disconnecting everything from the Fritzbox. Then I would connect a laptop with a ethernet cable to the fritzbox and check if this part works or if the Fritzbox is already broken.
I was hoping someone would come up with some form of magic and found the one thing i forgot...i tried to not disconnect everything (updated my post so you can see a sketch of my network) it would be a looooot of work....but i guess there is no choice
Without a managed switch, it's basically your only option.
My guess was gonna be a broadcast storm caused by a loop. Like a device that's connected to 2 different ports. That or a rogue dhcp.
Either way, taking a capture in Wireshark would have helped.If these are managed switches, configuring bpdu guard on LAN ports (not on trunk ports to other switches!) would prevent a device from forming a loop.
Never worked with wireshark^^ but i guess i should learn to use it in case something like this happens again....
No they are unmanaged switches. that's why i don't have VLAN aswell.
I find it useful even as a teaching tool.
Even when your stuff works, visualising packets on the network is something that helps with understanding networks in general.Wireshark can be overwhelming when there's a lot of traffic, but if you start with a basic setup and less noise, things make more sense.
When I coach someone I go through the very basic of getting internet connectivity while having Wireshark open, without your gazillion apps all phoning home.
Just DHCP, ARP, default gateway, DNS, TCP, HTTP.A decent part of becoming an expert in Wireshark is learning how to filter to see the exact traffic you need to see.
Connect one device at a time and see if you can narrow it down.
i edited my post and added a sketch of my network.
What order would you pick when connecting them again?
The least complex (in terms of secondary switches) first obviously. But I don't have any specific insights what could be causing it from looking at the diagram.
Are you also using Powerline? This can cause all kinds of wanky issues.
no i am not.
And even if, two devices connected via WiFi on the Router (directly, not via mesh or access point) shouldn't be disturbed by some wonky powerline should they?
What's the uptime of your router? Is it or any subsystem crashing frequently under load?
The uptime now is basically a couple minutes as i just restarted it again-
There is no load on my systems at the moment.
You may have tried it already but have you tried resetting the Fritz!Box 6591 modem?
no i didn't try resetting it to factory settings.
i set up pretty much stuff in there (VPNs, dedicated IPs, remote access, Phone Service, etc.) and i will delay that until the bitter end.
Yo, I have also been having problems with a fritzbox 7490. I initially thought it was the cat6e in the walls but we're having wifi issues as well. Perhaps the devices they built are starting to fail? Flash getting old, capacitors getting swollen etc. I'm hanging out for a microtik replacement just needs approval from the minister of finance.