I only use lemmy. Unless youtube counts but I don't think so.
Yeah so I tried my nvidia gtx 1660 and yeah everything worked perfectly first try.
its a amd ryzen 1600 it doesn't have an igpu. Although I have a spare gtx 1660 I might try that.
Bazzite has the same issue. Still no display output. And yes I'm sure my hdmi cable is plugged since it still works with safe graphics on and windows works perfectly with no issues.
Yeah that makes sense now. Thanks for the explanation.
Yeah it would be bad if that happened. Governments really hate privacy.
I feel like a 321 backup is kind of inhibitory specifically 2 different mediums. Hard disks are by far the cheapest and it seams a bit excessive storing your entire database on Ssd's or something like that.
Instead of making a whole new software why not just add number plate cameras to the osm database and make a software that pulls them out and makes it convenient to read?
I don't really understand the point of this. What kind of logs are you storing and why would you want to?
Yeah I've seen this distro seams really good and my main use case is gaming. I will give it a go.
I can't even get into the login screen without safe graphics on so I'm not sure how I can login to a specific tty.
Yeah that sounds promising. I have read the wiki page and I tried a few boot commands I followed this guide Here is what I have added to the boot manager screen:
(without additions)
GRUB version 2.12
load_video set gfxpayload=keep
insmod gzio
linux (sroot) /vmlinuz-6.11.6-300.fc41.x86_64 root=UUID=5еа3757а-72ac-492-9832-50b00b68f405 ro rootflags=subvol=root rhgb
quiet amdgpu.si_support=1 amdgpu.cik_support=1
initrd (sroot) /initramfs-6.11.6-300.fc41.x86_64.1mg stuned_initrd
Minimum Emacs-like screen editing is supported. TAB lists completions. Press Ctri-x or F10 to boot, Ctri-c or F2
for a command-line or ESC to discard edits and return to the GRUB menu.
(with additions)
GRUB version 2.12
load_video set gfxpayload=keep
insmod gzio
linux (sroot) /vmlinuz-6.11.6-300.fc41.x86_64 root=UUID=5еа3757а-72ac-492-9832-50b00b68f405 ro rootflags=subvol=root rhgb
quiet amdgpu.si_support=1 amdgpu.cik_support=1 video=LVDS-1:d video=VGA-1:e drm_kms_helper.edid_firmware=edid/1920x1080.bin
initrd (sroot) /initramfs-6.11.6-300.fc41.x86_64.1mg stuned_initrd
Minimum Emacs-like screen editing is supported. TAB lists completions. Press Ctri-x or F10 to boot, Ctri-c or F2
for a command-line or ESC to discard edits and return to the GRUB menu.
It didn't work but I think it might be because I am doing something wrong here.
Yep I switched out the cable and a different cable type and a different display didn't help.
could you explain how I might fix that?
yeah I tried using another display and switching out the display cable didn't help at all.
It seams cool but it's not foss and you need to make an account to sign up. Those are the main reasons I want to move away from F360 so I probably won't use it.
Breathing Life Into New Bodies, One Head At A Time.
Wow freecad looks really good. Might finally change from fusion 360.
Fedora and Linux Mint having no display output unless on safe graphics.
For the first time I am actually switching my main PC from Windows to Linux.
Problem: When booting into Fedora there was no display output, I changed it to safe graphics to install everything and that fixed it but after the install finished I tried turning it back off and there was still no display output
What I have already tried: I've tried installing drivers and everything I could find although that shouldn't be the problem since I have an AMD 6700xt and Fedora comes with AMD drivers built in. I also tried Installing Linux Mint thinking maybe the distro was the problem but it came up with the same issue.
And if anyone suggests it no there is no way I am going to daily drive on safe graphics.
Edit: I am dual booting on a single 500gb ssd with windows already installed on the other half of the drive, not sure if that would be the problem. Also a similar problem was happening on windows if I left the screen in login for too long without signing in the display would show no signal and it wouldn't wake up if I moved my mouse or clicked or pressed any keys.