I'm still mostly using Windows on my main PC. I've got a few jobs to finish before I switch, but the main one is scanning old photos from the 80s and 90s. I've tried lots of different scanning software on Linux, but I can't find anything that works as well as the Epson software that was bundled with the scanner.
It's got a few one click fixes for bad exposures that work really well too, so things like that orangey reddish cast that some photos have is fixed almost automatically. It can all be done easily in other software, but the time saved by doing it in the scanner software is massive.
"The sky above the port was blue, with a grey rectangular box with writing saying 'No signal found.'"
Surely a chicken egg is an egg laid by a chicken though, not an egg containing a chicken, otherwise unfertilised eggs wouldn't be chicken eggs.
If the mutation occurs in the creature inside the egg, then it makes sense to me that that's where the new species begins. The chicken came first 🤔
I'm going to stop saying chicken and egg now, it's getting ridiculous... 😁
Thanks 🙂
Thank you 🙂
Immich on its own looks good, but if I set it up, I think I'll definitely install lightGallery to go with it 🙂
You can see [a live demo here](https://immich-demo.note.sx/share/ffSw63qnIYMtpmg0RNvOui0Dpio7BbxsObjvH8YZaobIjIAzl5n7zTX5d6EDHdOYEvo), which is serving a gallery straight out of my own Immich instance.
Sorry, off topic, but is this what Immich looks like out of the box, or have you used any other plugins?
Immich Public Proxy looks like exactly what I want for my family photos, but I haven't looked into Immich yet. The demo looks beautiful, and is simple enough for the grandparents to use 🙂
No problem, hope you all enjoy your gaming 🙂
I've found codes for the family pass on legit key selling sites for around the same price as an individual key, so it's worth checking before you buy 👍
I've just checked the boxes, and Minecraft, Super Mario Bros. U Deluxe, and Mario Kart Deluxe 8 all support one player on the Switch Lite, up to four through the TV, and up to four on the non lite Switch 👍
This is excellent advice 🙂
The only part I might disagree with is this:
Get Switch Lites for anyone who REALLY needs to be playing something else independently when the TV/"main" Switch is in use
Obviously only if the budget allows, but if your kids are at the age where they'll take their Switch when they visit friends or family, then the version with detachable controllers is probably better.
The Switch has a built in kick stand, and some games, like Mario Kart, let you disconnect the controllers and have one each for a two player game. It's handy for keeping the kids quiet for a bit, and you don't need to carry loads of stuff.
If the kids regularly go somewhere, like your parents perhaps, you can buy an extra dock to plug into the TV there, and the non lite Switch can use it in exactly the same way as the one at home. There's nothing special about the dock, it essentially just connects the Switch to the TV.
It's a great little console with some fun, if sometimes expensive games. I play mine probably as much as my kid plays theirs 🙂
If you voted on the post or its comments, you should be able to find it that way 👍
Yeah, this is how I understand it too. From the end user's point of view, there's just one wifi network throughout the building or property. It doesn't matter if there's a cable running between the access points, that's all invisible to the user.
Nope. It does it with random videos every now and then, and with no obvious pattern. It's not lasting for a set amount of time either, so it's not like something's running in the background and slowing it down for a while.
In the past I've shut down everything I can think of on the server to stop something from taking priority, but it still happens. On those occasions it's happened for half an hour or more, but other times it might last for a few minutes, or just affect one episode.
Flatmates is used in the UK for someone who you share a flat with but have separate rooms, and roommates is used where you share a room, but not a bed, or are not in a romantic relationship with. It's generally for places like student accommodation.
They'll have to hard reset it first, the screen's frozen...
I just checked the episode through Plex, and it's direct playing. I didn't get any stuttering while I was skipping around though. I think it's Plex itself, either the server or the player.
My physical server is a bit old now, it's a Haswell i5, so if this was an ultra HD bluray rip I could understand it, but it's been playing HD and 4k videos without issues for years now.
I use Radarr to process my videos, and I'm sure I've got a plugin or script somewhere to download subtitles. I'd forgotten all about it since I've been using Plex, so I'll have to try to remember what it is.
I've checked the file. It's a bog standard h264 mkv and the video bitrate is only 10Mbps. There's nothing that the fire stick shouldn't be able to handle on its own. I'll try playing it on the fire stick again and see if it's trying to do something weird, but I can't see it being that.
Nothing unusual about it, and it plays perfectly on my PC. I've tried randomly skipping backwards and forwards, but still no issues. It's a bog standard h264 mkv file too, so nothing that would need to be transcoded
I hadn't heard of that. I'll check it out, thanks :)
It's just taken me 55 minutes to watch a 35 minute episode on Plex because of crashes
I put on an episode of a show I'm watching, and about ten minutes into it, I missed something on screen, so pressed the skip back button on my remote. The spinning loading circle came up, but stayed for a while, and the episode froze at the point where I'd pressed the button.
No problem I thought, I haven't used Plex for a while, it might just need a little kick. I restarted my fire stick, and restarted the Plex server, just in case. A few minutes later, I didn't catch what a character said, so I tried skipping back again. Plex crashed again. Another set of restarts and we're watching again.
About 15 minutes later, the episode just freezes. No error message or warning, just a frozen screen. I gave it a minute and pressed play, and Plex crashed back to the episode selection screen. Pressing play worked again for a few minutes, until I got an error on screen telling me that my network is too slow for the video. It's a less than 1080p video streaming at 10 Mbps over a gigabit connection. This time, reopening the video took me back to the point of the last issue.
So much for relaxing in front of the TV...
Roblox seems to be inflating user numbers again
I've just had an email from Roblox talking about changes to the parental controls. It looks more like they're forcing parents to create accounts, presumably to inflate user numbers going by the news stories two weeks ago.
The email text is below.
'Dear parent,
We’ve been working on a series of important changes that we’ll be making to your child’s account, (account name), next month.
About Roblox accounts with parent privileges Next month, we’re changing the way parents manage their child’s experience on Roblox by introducing Roblox accounts with parent privileges. After linking your account to your child’s, parents can view and update parental controls for their child all from their own device. Parents also get access to insights about their child’s Roblox usage, such as their daily screen time and on-platform friends.
Given these changes, starting next month, parents will no longer be able to set a parent PIN, use Account Restrictions, or receive account-related notifications to their parental email. Instead, you will need to use an account with parent privileges. Existing verified parental emails on child accounts will continue to be used for account recovery. Any settings previously set using a parent PIN will not change, but you will need an account with parent privileges to make updates going forward.
As always, if users are interested in an added layer of security on their account, you can set up 2-factor authentication.
Updated content maturity settings As we shared with the community in July, to help provide parents and users more clarity into the types of content available on Roblox, we’ll soon begin labeling experiences based on the type of content users can expect in an experience, rather than by age. Experience Guidelines will be renamed Content Labels, and you’ll be able to set limits on the type of content accessible to your child through the content maturity setting in parental controls.
New default settings for users under the age of 13 As part of Roblox’s commitment to safety, we are also updating certain default settings for our youngest users. Starting next month, users under the age of 13 will need parent permission to access certain chat features. Users under the age of 9 will also need parent permission to access experiences with content maturity “Moderate,” which may contain things like moderate violence or moderate crude humor.
Your child’s settings will be updated when they reach certain ages, if you and your child haven’t previously made changes to them. You and your child will be notified of these updates in advance.
We will share more information on these setting updates when the changes go into effect next month.
Next steps To continue receiving notifications about your child’s account related to spending or other important activity, you’ll need to set up a Roblox account with parent privileges and link to your child’s account. When these changes take effect, your child will receive a notification inviting them to add a linked parent account, and we’ll send you an email with instructions.
Since day one, Roblox has been committed to building safety features and tools into the design of our products. We will always continue to explore different ways to update our parental controls to make them even more useful for parents.
Roblox'
Reposted. Thanks for the replies about the problem with my last post 🙂
Is there a way to use a vpn on one network card, and use a second network card for a regular connection?
I've got a Linux server running Xubuntu at the moment (It was a media player first), and it also runs two Minecraft servers for the family. It has two network cards that are both connected to the internet. Is there a way to bind the VPN to one of the cards and use the other one for regular use?
I've got Surfshark as my VPN, and it doesn't allow port forwarding under Linux. I've got some software that I want to keep behind the VPN, but the lack of port forwarding is stopping me from sharing the Minecraft servers, and when the VPN is active, it slows down the connection to some of my services like Plex.
I've tried to look it up, but I just don't know enough to get myself anywhere. I've found results that talk about name spaces and routing tables, but they assume a level of knowledge that I just haven't got yet.
I want to use the Arr suite and qBittorrent as the main programs behind the VPN, and Plex, Mylar (a comic manager), Syncthing, and Minecraft as the main programs without it. If I set up qBittorrent and the Arrs as Docker containers, can I use Gluetun to bind just them to the VPN? The VPN is using OpenVPN connections if that makes a difference.
Thanks in advance :)
What's the best licence for sharing content with an organisation while keeping my rights?
As some of you may already know, I manage a website and app for a small music festival. It runs on a shoestring budget and helps to support the village I grew up in, so I volunteer my time and resources. Part of this is creating the site and things like posters using resources that I've made.
Recently we had an issue where someone created a logo for us, and after we'd used it for a few years, they claimed it back. It turned out that when they created the logo, neither side thought to draw up any sort of agreement on how it could be used. I want to put something in place that makes it clear that anything that I create for the festival can be used by them forever, but without restricting myself from using it.
My main concern is for the website and app, so that I can use the same structure in the future.
I'm not concerned about the fine print, like saying that I can use this specific text layout or whatever, I just want to stop either side from restricting the other in the event of a major falling out, with the exception of things that are exclusive to one side or the other, like the name of the festival.
What would be the best licence for that please? Thanks in advance :)
Kerbal Space Program
Kerbal Space Program is currently one of the free games through Amazon Prime with GOG, until Dec 18th
>Manage your own space program and help the Kerbals conquer space.
What's the best way to mount hard drives so that all users can access them at all times? Mint 22
Update: I managed to get it working with the answers from @[email protected] and this link:
https://www.zdnet.com/article/how-to-permanently-mount-a-drive-in-linux-and-why-you-should/
-----------------------------------------
I've just installed Mint 22 on my laptop, and I've got two storage drives alongside my main drive. I want these drives to be available to all users on boot, and to be readable and writable. At the moment they're treated as removable drives, and are mounted under the individual user. As a result, any permissions that I'm setting as the owner are not sticking when they're mounted by another user.
The first drive is synced with my main PC through Syncthing, and is synced to Onedrive from there. The second drive is my music, podcasts, and audiobooks, which are all synced through Syncthing only. I'm the only person using the laptop and accessing any of these files, so I'm not bothered about the wrong user accidentally opening them.
I've read some posts about editing fstab to mount them at startup, but they don't cover whether the drives will be available to other users or not. Can I just add them to fstab and mount them somewhere that's available to all users, then sort out the permissions? If so, where's the best place to put them?
Thanks in advance :)
If you could have every answer to your history based questions, would you take them?
It turns out that something has been watching the Earth in minute detail since before the solar system was formed, down to a sub molecular level. It can give you the answers to any historical questions, but not things like what someone was thinking or feeling.
All the world's problems have been solved, and the information is only used with the strictest privacy, e.g. you can only get information on living people with their permission, or if you're a member of law enforcement solving a crime.
The question is, if you have a hobby, job, or other reason to research the past, like being a geologist or genealogist, would you take the answers, or would you prefer to do the research yourself?
Can a Linux installation be run as a VM in Windows?
This might sound daft, but something similar used to work with live discs.
I've got Windows 10 and Mint 21.1 dual booting on my computer at the moment. Every so often I'll realise that I've missed something from my Windows installation. If it's important, I then have to boot to Windows to get the information, or the settings etc.
Is there a way to virtualise my Mint installation so that I can run both the OSs at once to make sure that I've got everything?
VirtualBox had a tool to do this with a live USB, but that was back in the MBR days, so it probably won't work with modern hardware.
EDIT: Sorry, I should clarify, Mint and Windows are on the same physical disk, and the plan is to remove Windows once I'm done.
Update: I'm giving up. It looks like it is possible if you have separate disks with separate boot partitions, but getting it to work with a shared boot partition is harder work than I'm willing to do right now.
VMware Player can use a partition or disk, but might be in read only mode, I couldn't get far enough to check.
Thanks for all the replies :)
My laptop hinge just ripped its screws right out.
I've just finished getting my laptop set up the way I like it, including maximising the RAM and upgrading the screen. I opened it up to use it, and the screws on the hinge tore through the plastic.
To top it off, the plastic on the bottom of the laptop, the side that's been removed here, has also broken.
My wife definitely didn't drop the laptop while she was tidying up though...
EDIT: Apologies all, I'm having trouble with Lemmy today, and it's not letting me reply.
I'll try to reply tomorrow, but in the meantime;
It's a Stonebook branded Clevo n751BU, a 7th gen i5. It's held up respectably well until it appears to have been knocked in the corner where the hinge is. The plastics on both sides of the hinge have given out.
I've ordered a replacement base, but the palm rest which is pictured is not available anywhere that I can find. I'm going to dismantle the hinge to clean and oil it, then reassemble it slightly less tightly, and epoxy the screws into place. The reason for taking it apart in the first place was to add a third hard drive. It has an nvme drive, and I had two HDDs going spare that can hold my documents and music. They're being synced now as I was having problems doing it remotely, but once they're in they can be managed with Syncthing. The laptop shouldn't need to come apart agin afterwards :)
I've been building and repairing computers and laptops for about 30 years, so I'm comfortable with completely stripping it, and can use it as an excuse to give everything a clean again. Short of replacing these HDDs with SSDs, there's nothing else that can physically be upgraded, so I'm half tempted to glue it shut so that I don't get tempted again :D
What is Calypso? (Discovery spoilers)
Hi all :)
I've recently watched the final episode of Discovery, and it's left me with some questions.
I'm just posting a line of text here to avoid any spoilers from showing up on people's timelines.
At the end of the episode, after the main story finished, Burnham went back to Discovery and spoke to Zora. She had a flashback, then took Discovery to some far off location to wait. Other posts I've seen have mentioned that this ties in to Calypso and seemed to suggest that Burnham's son also has something to do with it.
The problem is, I have no idea what Calypso is, and that's made me wonder what else I'm missing. I've seen the posts about the academy series and Section 31 movie, but can someone fill me in please?
EDIT: Thanks for the answers, looks like I need to watch the Discovery Shorts :)
Looking for a collaborative notes app
Hi all, I need your expertise please :)
tldr: I'm looking for something to create and share lists with my wife, but that also allows her to edit them, preferably with a WYSIWYG editor, on both our Android devices and Windows and Linux computers. To complicate things, I help to run a small music festival, and some sort of collaboration tool would be helpful there too. Joplin looks great, but I can't figure out the collaboration without using their server.
The longer version is, I'm taking my family to visit the in-laws, and was making a list of things we need to take. I have complicated medical needs, and my kid is autistic, so there are things that we cannot forget. I realised that a list that we can both work on would be better, and would be something that we could use in the future for things like medical appointments.
While I was looking for some software, I realised that it would also be helpful for the music festival committee.
I'm looking for something that we can edit on any device, and have the changes show up immediately on any other logged in device. I want anyone with permission to be able to edit the document too. Ideally it needs a WYSIWYG editor, and needs to be simple to use once it's set up.
Joplin looks great, but it's not clear whether collaboration is only available through Joplin Cloud, or whether it's available with a self hosted server.
Etherpad and Padland look good, but Etherpad doesn't currently have mobile support, and I can't tell whether Padland is standalone or needs Etherpad to work.
I'm happy to self host something, but the simpler it is to run and use, the better :)
Thanks for reading through all of that :D
Does anyone know of any decent accounting software for Windows and Linux?
Hi all :)
I'm setting up a small business in the UK, and need some accounting software to keep track of everything, and generate invoices, that sort of thing. I tried Wave a few years ago, and it looks like it does what I need, but is US based and proprietary.
It has the option of linking to your bank account too, and automatically pulling your transactions etc. This is quite important, as I'm trying to get diagnosed with ADHD, and have a terrible memory. I won't remember to manually enter transactions regularly.
Being able to use it on Android and Windows / Linux would be ideal. I can self host it if there are any options that work.
Does anyone have any ideas please?
What do I need for an online private server?
Hi all :)
I've been playing Minecraft with the family, and running a local PaperMC server for a while now, and last year set up an online server with the Oracle free tier. I've had a load of failed login attempts recently, and the server crashed. I don't know if they were related, but it made me realise that I've missed a few steps during the setup.
I have a domain that points to the server through Cloudflare, so it's easier to share, and I've got a whitelist / allowlist of Minecraft users to keep it private. My thinking is that this is what I want:
Domain name through Cloudflare to stop things like DDoS attacks, and to have https certificates (might need LetsEncrypt too?).
PaperMC server running on an Ubuntu server on Oracle's free tier. 2 cores and 10GB RAM should be enough for less than a dozen players.
Pterodactyl control panel to manage the server through a GUI from anywhere.
Firewall / block to stop connections from outside the UK. Hopefully that should restrict bots and malicious login attempts.
I've got a handful of plugins that I use, like Geyser / Floodgate and ViaVersion so the kids can log in from any client, and Dynmap so I can view the map and help them out if needs be. I've got CoreProtect and ServerBackup too. I've got OpenAudioMC so that the kids can speak to each other without putting them on something open like Discord, as they're too young for that.
I'm looking into AutoPlug at the moment to keep the plugins up to date, but I don't know if it runs with Pterodactyl or not.
Am I missing anything obvious? I'm happy with the gameplay side of things for now, but I could do with some advice on keeping everything secure.
Thanks in advance :)
Looking for a minimal distro for a virtual machine
Hi all :)
I manage a handful of websites and their emails using the PortableApps suite on Windows, so have a separate browser and mail client for each one. This has worked well for years, but now I'm switching to Linux, Mint specifically. I've read that I can set up profiles on Firefox and probably Thunderbird, or maybe run separate instances with things like AppImages, but it sounds like it's a messy solution, and could end up with me using the wrong profile by mistake
What I want to do is set up a virtual machine for each site, and have a completely separate instance of the programs, and hopefully a way to easily transfer the machines to other systems if needs be.
I'd prefer to use a Debian / Ubuntu based distro with Apt and the 'Windows' style desktop, as that's what I'm already used to, but am I better off installing Mint and stripping it down, or is there something more suited to this?
Thanks in advance :)
Can I mod my ebike (UK)?
Hi all :)
I've just bought a Vitesse Force ebike. It was second hand, but brand new as the previous owner bid on two separate auctions and won both (he's someone I trust, so I believe him). Other than a few tweaks, the bike is great, but I want to make it even better if possible.
The main thing I want to change is the walk assist speed. As I understand it, in the UK we can't have powered ebikes, they can only move very slowly when you're not pedalling. I tested the speed yesterday, and on a slope it's barely fast enough to stay upright.
The main reason that I bought an ebike is because I'm disabled and overweight, and live in the middle of a load of hills. I'm hoping to get the walk assist speed up just high enough to get me up a hill to the nearest flat cycle path so that I can ride, or home again afterwards if I've overdone it. For now I can't pedal continuously for long enough to get to the top, and the pedal assist stops when I stop.
The other thing I'm curious about changing is the number of gears. The bike is a seven speed, but I've never used an ebike before, so I don't know if that's enough for when I want to turn the pedal assist off.
The bike is here for anyone interested:
https://www.gooutdoors.co.uk/16183641/vitesse-force-mtb-wm-electric-bike-16183641
I'd be grateful for any advice :)
According to my camera's focus assist, this is perfectly focused
Went out on a rare clear night to a wetlands near me to take some photos of the stars. As it was so dark, and the stars are so small, I had to rely on the focus peaking function of my camera to tell if the stars were in focus or not.
I've got home and started to process the photos, and I've found out that despite the camera telling me that they were in focus, they clearly weren't.
Hey ho, what's a wasted few hours in the freezing cold between friends...
How do you add buildings when the map is crooked?
Sorry, crooked isn't the best word, but I can't think of a better one.
I'm still quite new to OSM, and I want to start adding the buildings in my town. When I open the edit option though, the map overlay is at an angle. It's not a massive amount, but it's enough that you can see one sometimes two sides of most buildings, so the roof isn't aligned straight down, if that makes sense?
I live near Aberdare in South Wales, and you can see that where someone has added some buildings in the town centre at some point, they're now not aligned with the map overlay:
https://www.openstreetmap.org/edit#map=20/51.71312/-3.44499
Do I draw around the roof that I can see on the map? Do I edit the existing buildings so that they line up with the overlay? I'm not sure what the best course of action is for something like this.
Thanks in advance :)
Can I use Voyager on my PC?
Apologies if this is a simple question and I've missed something, but I'd like to be able to use Voyager on my PC.
If I just log in on my browser, I only get logged in to my home instance. If I use wefwef.app, I can browse like I'm on my phone, but without my preferences and block list.
Is there a way to use Voyager and sync my preferences, block list, subscriptions etc?
Need help repairing or replacing a Xiaomi Mi 10t Lite 5g (UK)
Update: My wife has decided to go for the repair. I managed to find the parts for about £30, and we're getting it done in a local place next week. Thanks for the advice :)
Hi all :)
My wife has dropped her Mi 10t Lite 5g one too many times, and now as well as a cracked screen, it won't charge. As far as I can tell, the charging port has come loose.
I'm hoping to get an estimate of the repair price, as all the local shops are closed until next week, but I'm also hoping to find some possible replacements to give her some options.
She mainly uses it for Facebook, emails, and WhatsApp, and some of the farming games where you seem to just click crap randomly. She also connects it to her car for maps and music, and takes photos of our kid.
A micro SD slot is essential, mostly due to the amount of music and photos she stores on it.
I'm hoping to spend around £200, but that's flexible if there's a jump in quality or features.
Thanks in advance :)
Need some help with Xubuntu networking please.
Hi all :)
Apologies for the long writeup, but I'm not sure if the background is important or not.
I've got a media server currently running Xubuntu (getting ready to be transitioned to a proper server OS before anyone asks), and I've been having a problem with static IP addresses.
About a year ago I was having a problem with the ethernet card switching from a static IP to DHCP, and screwing up the services that depended on the IP address. It appeared to be a problem with my ISP router (BT SmartHub 2). I thought I'd fixed it, and didn't have any trouble for a while.
I added a second ethernet card to split my traffic. My VPN doesn't allow split tunneling on Linux, and I wanted some traffic to go through the VPN while some bypassed it. I hadn't set anything up for that yet, but did give the second ethernet card a static IP address. I changed the DNS servers on both to go through my AdGuard installation on the same machine, and some other ad blocking DNS servers.
When I first installed the second ethernet card I had a few problems, but my network switch died at the same time, and replacing it appeared to cure the issues. The issues were similar to before, in that I couldn't get a static IP to stick.
To now - Last night we were having some power issues in the area, power surges and brownouts. In the time that it took me to get to my PC and log in to the media server to shut it down, it had rebooted at least three times. I shut everything down successfully, and after I turned everything back on this morning, the services like Plex that don't need the IP all seemed to be working properly.
After my kid went to bed, I tried to log onto the server to check it. Nothing that needed the IP address would work. I tried the second IP address and that was the same. I managed to log in with NoMachine and saw that there were two new ethernet connections, both set to DHCP, and they were being used instead of the previous connections. The previous connections apparently haven't been used for the last six days.
I tried deleting one of the new connections to see if it would force Xubuntu to use the old ones, and it seemed to work, but deleting the second one cut off the network connections completely. After connecting a monitor and peripherals to the server, I could see an option for an Auto Connection in the network dropdown menu, and that let me connect again.
My previous connections are still in the network manager with all the static IP settings, but there are two new Auto Ethernet connections too, using DHCP.
Can anyone give me a clue as to what's happened here please? I thought it was a problem caused by the power problems, but it's apparently been going on for almost a week.
Apologies in advance if I'm slow to reply for the next few days, and thank you in advance for any help :)