Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)XA
Xamith @lemmy.ca
Posts 1
Comments 16
Twin I Beam prerunner I'm working on
  • The one that appears to be connected at the front has another beam that goes down to the other wheel knuckle. The one at the front is connected to the servo for the steering input. Hope that helps! Look up "dual swingset steering" for more information.

  • Twin I Beam prerunner I'm working on
  • Econofil PLA from filaments.ca

    I love this line of filament, never had any problems with it. Used this colour just to use it up on my first test print, it's not my favourite colour. Looks too much like dry pasta.

  • Twin I Beam prerunner I'm working on

    I wanted a 1/10 scale prerunner with long travel suspension so I decided to make it myself! Designed in OnShape, printed on an Ender 3. I have a bit more info on my thingiverse page. Any other RC hobbyists on here? https://www.thingiverse.com/thing:6306854

    11
    *Permanently Deleted*
  • Okay so flying kites is a very good time. Two line sport kites can be reasonably cheap and easy to learn. You can transition into larger power kites that are a total blast and quite a workout to control. I've never done it but you can move up to kiteboarding or similar sports as well.