I'm attempting to configure an anonymized DNS service using dnscrypt-proxy2, routed through the Tor network. I believe I have everything needed for it to work, but that does not seem to be the case. The DNS resolution is fine, but it's not being proxied through Tor as desired.

```nix services.resolved.enable = false; services.dnscrypt-proxy2 = { enable = true; settings = { ipv6_servers = config.networking.enableIPv6; block_ipv6 = !(config.networking.enableIPv6); listen_addresses = ["127.0.0.1:53" "[::1]:53"]; force_tcp = true;

use_syslog = false; odoh_servers = true; require_dnssec = true; require_nolog = false; require_nofilter = true;

anonymized_dns = { routes = [ { server_name = "*"; via = ["anon-plan9-dns" "anon-v.dnscrypt.up-ipv4"]; } ]; skip_incompatible = true; };

sources.public-resolvers = { urls = [ "https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/public-resolvers.md" "https://download.dnscrypt.info/resolvers-list/v3/public-resolvers.md" ]; cache_file = "/var/lib/dnscrypt-proxy2/public-resolvers.md"; minisign_key = "RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3"; };

block_unqualified = true; block_undelegated = true; proxy = "socks5://127.0.0.1:9050"; }; };

systemd.services.dnscrypt-proxy2.serviceConfig = { StateDirectory = "dnscrypt-proxy"; }; nix useDHCP = false; enableIPv6 = true; nameservers = [ "127.0.0.1" "::1" ]; networkmanager.enable = true; networkmanager.dns = "none"; nix services.tor = { enable = true; enableGeoIP = false; torsocks.enable = true; client = { enable = true; }; }; ```

I've been trying to achieve a working mail setup on nixos by using simple-nixos-mailserver. ``` mailserver = { enable = true; certificateScheme = "acme-nginx"; enableManageSieve = true; fqdn = "email.teatastic.org"; domains = ["teatastic.org"]; mailboxes = { Drafts = { auto = "subscribe"; specialUse = "Drafts"; }; Junk = { auto = "subscribe"; specialUse = "Junk"; }; Sent = { auto = "subscribe"; specialUse = "Sent"; }; Trash = { auto = "no"; specialUse = "Trash"; }; };

loginAccounts = { "[email protected]" = { hashedPasswordFile = config.sops.secrets.password.path; aliases = ["[email protected]"]; }; };

fullTextSearch = { enable = false; enforced = "body"; indexAttachments = true; memoryLimit = 512; };

enableImap = true; enablePop3 = true; enableImapSsl = true; enablePop3Ssl = true;

virusScanning = false; }; services.roundcube = { enable = true; package = pkgs.roundcube.withPlugins ( plugins: [ plugins.carddav plugins.contextmenu plugins.custom_from plugins.persistent_login plugins.thunderbird_labels ] ); plugins = [ "attachment_reminder" # Roundcube internal plugin "carddav" "contextmenu" "custom_from" "managesieve" # Roundcube internal plugin "newmail_notifier" # Roundcube internal plugin "persistent_login" "thunderbird_labels" "zipdownload" # Roundcube internal plugin ]; #dicts = with pkgs.aspellDicts; [en]; hostName = config.mailserver.fqdn; maxAttachmentSize = 100; extraConfig = '' $config['smtp_server'] = "tls://${config.mailserver.fqdn}"; $config['smtp_user'] = "%u"; $config['smtp_pass'] = "%p"; ''; };

security.acme = { acceptTerms = true; defaults.email = "[email protected]"; }; firewall = { enable = true; allowedTCPPorts = [ 25 587 143 993 110 995 # Email 80 # Nginx ]; }; ``` I'm logging in through roundcube, which works as expected. However, when I get to the point of composing an email to somebody, it just starts a "Sending message..." loop without actually sending anything.

I've forwarded the aforementioned ports on my router, yet it fails.

To increase the security of my NAT configuration, I opted to implement port triggering instead of the traditional port forwarding on my router. I chose this approach in order to configure it from my nix configuration.

Specifically, I have enabled port 443 triggering on my router and included the following configuration: nftables = { enable = true; ruleset = '' table ip nat { chain PREROUTING { type nat hook prerouting priority dstnat; policy accept; iifname "wlp2s0" tcp dport 443 dnat to 10.100.0.3:443 } } ''; }; nat = { enable = true; internalInterfaces = ["lo"]; externalInterface = "wlp2s0"; forwardPorts = [ { sourcePort = 443; proto = "tcp"; destination = "10.100.0.3:443"; } ]; }; Now, after rebuilding, it still does not work and I'm left to wonder why. Are both the NAT and nftables settings even meant to run at the same time?

I've been trying to create a public instance of SearXNG by using NixOS, Cloudflare and Nginx, but I can't seem to make it open to the internet and I've ran out of ideas. Is there anything I'm overlooking? ``` services.searx = { enable = true; redisCreateLocally = true; limiterSettings = { real_ip = { x_for = 1;

ipv4_prefix = 32; ipv6_prefix = 56; }; botdetection = { ip_limit = { filter_link_local = true; link_token = true; }; ip_lists = { pass_ip = [ "192.168.0.0/16" "fe80::/10" ]; pass_searxng_org = true; }; }; }; runInUwsgi = true; uwsgiConfig = { socket = "/run/searx/searx.sock"; http = ":8888"; chmod-socket = "660"; disable-logging = true; }; settings = { general = { debug = false; instance_name = "SearXNG Instance"; donation_url = false; contact_url = false; enable_metrics = false; };

ui = { static_use_hash = true; theme_args.simple_style = "dark"; query_in_title = true; center_alignment = true; results_on_new_tab = false; };

search = { safe_search = 2; autocomplete_min = 2; autocomplete = "duckduckgo"; };

server = { port = 8888; bind_address = "0.0.0.0"; secret_key = config.sops.secrets.searx.path; image_proxy = true; method = "GET";

default_locale = "en"; default_lang = "en-US"; base_url = "https://myinstance.org"; public_instance = true; }; engines = lib.mapAttrsToList (name: value: {inherit name;} // value) { "duckduckgo".disabled = false; "brave".disabled = true; }; outgoing = { request_timeout = 5.0; max_request_timeout = 15.0; pool_connections = 100; pool_maxsize = 15; enable_http2 = true; }; }; }; services.nginx = { enable = true; recommendedGzipSettings = true; recommendedOptimisation = true; recommendedProxySettings = true; recommendedTlsSettings = true; virtualHosts = { "myinstance.org" = { forceSSL = true; sslCertificate = config.sops.secrets."SSL-Certificates/Cloudflare/Cert".path; sslCertificateKey = config.sops.secrets."SSL-Certificates/Cloudflare/Key".path; locations = { "/" = { extraConfig = '' uwsgi_pass unix:${config.services.searx.uwsgiConfig.socket}; ''; }; }; }; }; }; ```