Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)HE
HelixDab2 @lemm.ee
Posts 5
Comments 2.7K
"What Is Your Dream for Mozilla" - Mozilla is doing a survey, and it could be a good opportunity to share some of the feedback that usually gets commented here :)
  • IMO, there's no such thing as responsible AI use. All of the uses so far are bad, and I can't see any that would work as well as a trained human. Even worse, there's zero accountability; when an AI makes a mistake and gets people killed, no executives or programmers will ever face any criminal charges because the blame will be too diffuse.

  • Migrants hope Trump mass deportations only 'for criminals'
  • requires a trial.

    Not for people that are undocumented. People that are not in the us legally get hearings, but that's policy rather than law, IIRC. Due process gets a little weird here, because the process in question isn't a matter of law or the constitution.

    Regardless - it's not going to go well for anyone that thinks that he doesn't mean them.

    The denaturalization concept--stripping naturalized citizens of citizenship--is fa, far scarier than deportation. Once you can strip citizenship from a naturalized citizen, and once you've eliminated birthright citizenship, you've got a roadmap for stripping citizenship from anyone.

  • Can't install app because it isn't "certified" by the government
  • For Tor to work, you have to reduce your security settings, and allow javascript; that's not generally a good idea when you're using Tor. Even when you do that, the network is slow enough that videos don't seem to complete loading. (I just checked.)

  • Migrants hope Trump mass deportations only 'for criminals'
  • Anyone that thinks that it's going to be only 'criminals' that get deported forget that crossing the border without documentation is a crime. Yeah, it's a misdemeanor, but it's still a crime, and the Trump administration is still going to deport them when they can.

  • Mug Shot
  • I'm fairly confident that that cat is a Lykoi. It's a very new breed of cat; they have guard hair, but no undercoat. So far, they're believed to be a very hardy breed with no known health issues (unlike, say, Sphynx, which have a high rate of hypertrophic cardiomyopathy).

  • Here we are
  • The number should have been capped smaller. As it is, there are too many representatives; it's already impossibly hard to get anything through congress. If you want to make gridlock even worse, then sure, add more people.

  • Here we are
  • CA would need 68 representatives just to have the same representation as Wyoming.

    Every state is guaranteed one representative, and then otherwise by population. Wyoming has one representative.

  • Opinion | Voters punished Biden for problems he didn’t cause and effectively addressed
  • It is, yeah. When you look at accounts like Occupy Democrats and start fact checking them, there's a lot of bullshit that they post. Like, pants on fire kind of bullshit. I knew a lot of people that followed them. In order to get engagement, accounts need to stir up emotions and get people to react and comment; it's easier to do that with things that outrage rather than dense policy positions.

    I want to believe that the political left is more intellectually honest than the right, but that's because I'm mostly on the political left. (I'm an anarchist at heart, but with a cynical disbelief in the ability of people to work together in a country the size of the US without some degree of authoritarian control.) So I try to fact-check all of the sources that I use for both factual information, as well as ideological biases.

  • Opinion | Voters punished Biden for problems he didn’t cause and effectively addressed
  • Yes, I understand that. But on social media you aren't necessarily getting right-wing propaganda, as there's plenty of left-wing propaganda and misinformation as well. That's why I'm saying that they're low- or no-information voters that are working solely on feels.

  • I am starting the process to immigrate to Canada from the US. Maybe unsurprisingly I find I have no ideas where I would like to live. I do enjoy mountains, and don't want to be in the heart of a city.
  • Oops, sorry... That was an oversight; my mind skips over Manitoba when I'm thinking of the large, southern provinces.

    I also didn't bring up the Northwest Territories, Nunavet, Yukon, New Brunswick, or Newfoundland and Labrador. If they like mountains, NT and Yukon might both work, although getting any kind of supplies in will likely be difficult.

  • Opinion | Voters punished Biden for problems he didn’t cause and effectively addressed
  • Even if you’re a relatively disconnected right winger

    I'm not talking about relatively disconnected right wingers; I'm talking about people that are largely centrist, and not paying attention to Fox, NBC, CNN, or any newspapers, and gets all of their 'news' from social media. I guess you'd call them the hoi poloi; they're low-information voters (or no information voters), and mostly apathetic as long as they feel like they're getting by. Policy won't matter to them very much; they're voting on feels.

    any right winger that obsessively follows the news is literally ben shapiro or alex jones.

    That depends. There are a number of people that are extremely fiscally conservative that have zero interest in culture wars issues. Most of them have defected from the Republican party entirely though, because they see that the current iteration of the Republican party is deeply harmful to the kind of conservatism that they stand for. But that kind of conservative hasn't really been popular since about the time that Newt Gingritch was trying to stir up the country against a president that didn't keep his dick in his pants.

  • Opinion | Voters punished Biden for problems he didn’t cause and effectively addressed
  • We can probably tolerate a little more disinflation, as a treat.

    No, not really, because deflation (not disinflation) tends to be self-sustaining, much like hyperinflation does. If the dollar I have today will buy two dollars worth of goods next week, then I'm going to hold onto my dollar to make any sort of discretionary purchase until next week. When everyone does that, all at the same time, it's like building a dam; the flow of money just grinds to a halt. Companies don't have money coming in, so they can't pay workers, which leads to layoffs, and the people laid off have no income to buy anything now, which feeds right back into that cycle.

    I agree with you that corporations need to be reined in, that executive salaries are out of control, and that things like stock-buybacks are the bane of a functional economy. But that's literally going to take legislation in this country to fix, in the same way that it did when the economy crashed in the 1920's, and I guarantee you that there's going to be zero political interest in that for at least two years.

  • what is the most "above your station" thing you have ever experienced?
  • Ironically, after working in production for over a decade, I'm hoping to go back to school for business management. Because it turns out that there's zero career track and advancement potential if I stick with what I already know. Depressing shit.

  • Paul vs. Tyson
  • Paul is 9-1, the one loss being a split decision, and 6 of the wins being knockouts. He's inexperienced, but that doesn't mean he's not good.

    I want to see Tyson knock him out in under ten seconds. But I don't think I'll get my wish.

  • Meltdowns and being verbal

    I'm a grown-ass adult, and was diagnosed as being on the spectrum quite late; Aspergers wasn't even a valid diagnosis until after I had graduated from high school.

    So, haven't really had a lot of support.

    Just wanted to check in with other people - what does a meltdown mean for you, in terms of communicating? When I'm feeling emotionally overwhelmed, I have words in my head, but I can get them out of my mouth. If I try to write things down, I either have the same block, or I'll write, erase, re-write, erase again, and repeat tens of times until I give up.

    13

    BSOD kernel_security_check_failure on graphic card driver installation

    Win 11 IoT Enterprise LTSC, 10.0.26100, AMD Ryzen 9 7900X3D processor, 64gb RAM, ASUS ProArt X670E-Creator mboard, AMD Radeon RX 7800 XT graphics card.

    All other drivers except the graphics card driver be up-to-date and working correctly; they have been updated directly from the manufacturer sites.

    Every time I try to install the most recent graphics drivers (amd-software-adrenalin-edition-24.7.1-minimalsetup-240718_web), I get about 48% of the way through the installation, and then get a BSOD, with the stop code KERNEL_SECURITY_CHECK_FAILURE. I've already tried using the AMD removal tool, rebooting in a clean environment and safe mode to reinstall, and had the same issue. Their driver installation tool gives me the option of installing PRO 24.Q2 (which appears to be for their PRO W and PRO WX series of graphics cards, rather than the RX 7000 series; it's listed as a downgrade), but gives me a 195 error when I try. I've just sent the DxDiag.txt and MSinfo32.nfo to AMD tech support.

    Since I'm not running games yet, this isn't impeding much of anything. However, I am having issues with my Meta Quest 3--specifically the link software--but I don't believe that those are directly related; I think that's a problem with my home network. The software is telling me that my system doesn't meet minimum spec though, which is not good.

    Any ideas?

    6

    Repair or replace?

    This is being cross-posted for as much feedback as I can get.

    My '12 Honda CBR600RR is nearing the end of it's life at 82,000 miles; there's minor visible scoring in the nikasil plating in the cylinders, and that's only going to get worse.

    I can get the cylinders replated--assuming that the scoring is no worse than I think it is--for about $800 + the cost of shipping the block, but that would require being able to entirely rebuild the engine on my own. I'd probably want to also regrind the valve seats, replace the valves, piston heads, and def. piston rings if I did that. I've already got the cylinder head off because the valves weren't holding pressure.

    I can get a replacement engine for around $1500-2500. I can replace an engine on my own, although it's a pain in the ass.

    Or, I can get a new bike. But I'm not sure what makes and models for my riding style will have any better longevity than my CBR600RR has had.

    My current short-list is a crashed '07- '12 CBR600RR (because I can easily swap necessary parts/bodywork, etc.), or a Yamaha YZF R6, Suzuki GSX R750, or Triumph Speed Triple 1050 (which is prone to electrical issues, and also needs some creative headlight adjustment to work with clip-on bars). Does anyone have experience with the YZF R6, GSX R750, or Speed Triple? Any issues to watch out for that might prevent any of them from making it to 100k miles without major mechanical work?

    11

    Repair or replace?

    This is being cross-posted for as much feedback as I can get.

    My '12 Honda CBR600RR is nearing the end of it's life at 82,000 miles; there's minor visible scoring in the nikasil plating in the cylinders, and that's only going to get worse.

    I can get the cylinders replated--assuming that the scoring is no worse than I think it is--for about $800 + the cost of shipping the block, but that would require being able to entirely rebuild the engine on my own. I'd probably want to also regrind the valve seats, replace the valves, piston heads, and def. piston rings if I did that. I've already got the cylinder head off because the valves weren't holding pressure.

    I can get a replacement engine for around $1500-2500. I can replace an engine on my own, although it's a pain in the ass.

    Or, I can get a new bike. But I'm not sure what makes and models for my riding style will have any better longevity than my CBR600RR has had.

    My current short-list is a crashed '07- '12 CBR600RR (because I can easily swap necessary parts/bodywork, etc.), or a Yamaha YZF R6, Suzuki GSX R750, or Triumph Speed Triple 1050 (which is prone to electrical issues, and also needs some creative headlight adjustment to work with clip-on bars). Does anyone have experience with the YZF R6, GSX R750, or Speed Triple? Any issues to watch out for that might prevent any of them from making it to 100k miles without major mechanical work?

    4

    Repair or replace?

    This is being cross-posted for as much feedback as I can get.

    My '12 Honda CBR600RR is nearing the end of it's life at 82,000 miles; there's minor visible scoring in the nikasil plating in the cylinders, and that's only going to get worse.

    I can get the cylinders replated--assuming that the scoring is no worse than I think it is--for about $800 + the cost of shipping the block, but that would require being able to entirely rebuild the engine on my own. I'd probably want to also regrind the valve seats, replace the valves, piston heads, and def. piston rings if I did that. I've already got the cylinder head off because the valves weren't holding pressure.

    I can get a replacement engine for around $1500-2500. I can replace an engine on my own, although it's a pain in the ass.

    Or, I can get a new bike. But I'm not sure what makes and models for my riding style will have any better longevity than my CBR600RR has had.

    My current short-list is a crashed '07- '12 CBR600RR (because I can easily swap necessary parts/bodywork, etc.), or a Yamaha YZF R6, Suzuki GSX R750, or Triumph Speed Triple 1050 (which is prone to electrical issues, and also needs some creative headlight adjustment to work with clip-on bars). Does anyone have experience with the YZF R6, GSX R750, or Speed Triple? Any issues to watch out for that might prevent any of them from making it to 100k miles without major mechanical work?

    0