Absolute beginner with questions

Personally I prefer OpenSCAD and SolveSpace for designing as they provide easy way to work and get precise measurements.

• OpenSCAD is programming based CAD tool, which is to say you write down commands like make a cube, 10mm high, from it subtract a cylinder, etc. It's great for basic models and doing a quick one off things. It's capable of more complex stuff but lack of optimization and no help of any kind makes it a wasted effort for complex stuff. Because it's like a programming language it's the de-facto standard when it comes to configurable prints;

• SolveSpace is parametric CAD tool. You draw things with simple elements like lines, arcs and similar and then form the shape with restrictions. For example you can tell two lines to be parallel and equal in size. And then only define size of one. Drawing is considered solved when there are no more degrees of freedom left. Solve space is more what a technical person would like. It looks kind of like AutoCAD and other CAD softwares. You can do quite complex stuff with it but complex stuff can take time because you approach the design with a technical drawing and then move from there by adding extrusions, revolves and similar. FreeCAD works in the same way, but I prefer SolveSpace;

• Blender is also a notable 3D design tool and the one that's easiest to do quick mockups and free hand. However setting up blender scaling so 1unit = 1mm cane be quite a problem. Also Blender is not exactly designed for precise work. You can of course specify width and angles and whatnot, but it's mostly modeling tool so most of its tools are going to be targeted towards that.

For slicer, I wholeheartedly recommend PrusaSlicer from Prusa labs. It will give you sane defaults and excellent print quality without overwhelming you with configuration and data. I use to use CURA and pretty much gave up on it simply because it has too many options. PrusaSlicer works and works well. There are other options out there, even super expensive paid versions, but I don't think they are worth it. Some people swear by them, but to me they don't provide much benefit for the price they cost.

I wouldn't suggest going OctoPrint route just yet. It's a lot more to add to the learning curve and only benefit you get is a bit of convenience with network print and supervision. Which is not all that useful anyway. I use to run OctoPrint server, but stopped doing so last year. Once you have well configured printer it will be a fire and forget kind of thing anyway.

Good advice I can give you is look into better nozzle at some point. You don't have to go the expensive route. Simple MicroSwiss plated nozzle is good enough (~20$). High quality nozzle means a lot, and I mean a lot. It's a huge difference between issues you had trouble figuring out and print looking very consistent with proper layer bonding and similar.

TeachingTech has an awesome resource and YouTube channel related to 3D printing. He goes into details with everything and does explain things with examples. His 3D printer calibration scripts are great. They are basically GCODE generating scripts which make lives very easy. Things like flow calibration, temperature towers, z-offset, etc. All easily done and explained with a video.

Am not sure which printer you got, but if it has manual bed leveling with springs, get rid of them and replace them with silicone pads. Easily the best upgrade you'll do. Springs are a never-ending source of issues with first layer. They slightly bend, your print unsticks. You print 2-3 times, have to recalibrate, etc. Silicone is compressible but remains firm so there's no wobble and once configured bed remains leveled forever.

If you have detailed questions, ask-away.