-
What's the best way to remove this rubber transfer on GBC PCB
My A button was requiring a harder press for the input to be registered than normal, so I opened up my GBC and noticed this transfer on the PCB. I guess years as a child hard holding A to improve pokemon catch rates had caught up. What's the best way to remove this? Isopropyl alcohol and cotton bud?
-
Time To Play Some Night Trap
Limited Run Games did preorders last April fools 2023. No actual gameplay, just the movies in quality similar to the GBA video carts.
Rom is 256mb. It doesn't load in the Mister, OpenFPGA, or mGBA.
-
Original Link's Awakening Manual
Won this manual at a Good Will charity auction. Just wanted to share it here in hopes that it would make some of you smile as big as I did!
-
Golden Sun via 2DS
This game was so much fun in highschool. I never purchased the Lost Age way back then, but I saved my password for decades with the intent to pick it up eventually. I was pretty ecstatic about the games being released on Switch Virtual Console, but playing The Lost Age on the Switch... It just isn't the same.
So I just started playing it on a modded 2DS. I have decided this is the console I'm going to finish the series with. Definitely better dpad (and joystick), comfortable to hold, and maybe the smaller screen helps it appear more like the original games.
-
Avoid Aliexpress FRAM Upgrade
Bought this little kit for a few dollars on aliexpress awhile ago figuring it was an interesting project. I would not recommend it and I've already revered back to stock.
- It makes the cartridge bulge.
- The long term reliability is questionable (my chip seemed like a rebadge).
- It will not work correctly on the analogue pocket (and possibly the FunnyPlaying FPGA GBC).
Also I wouldn't use clips like this for the battery when you can use the HDR retainer. This was done years ago and I don't have any more of those on hand to replace it.
-
Technically not a Game Boy, but why are there literally zero aftermarket 2DS shells?
DS Lite? Yes. DSi XL? For sure. 2DS XL, 3DS and its New and XL variants? You bet. But not a single 2DS aftermarket shell. Single backplates are sold here and there but not the whole assembly.
What gives? Is the 2DS really that niche compared to its siblings?
-
Flashcart Conversion
Fun project to convert a Japanese cartridge to a Flashcart I assembled a while back. https://github.com/JRodrigoTech/FLASH-ROM-Adapter-for-GameBoy
-
3D printed custom shell and label for Pokemon '97 Reforged
If you haven’t given this romhack a shot, it’s worth a go. It tries to recreate the original 1997 demo of Pokemon Gold/Silver from Nintendo SpaceWorld.
Link to STL file here
- gizmodo.com This DIY Kit Could Turn Your Game Boy Color Into a Mini Gaming PC
The ReBoi kit promises to replace the Game Boy’s guts and display with no soldering required, but you’ll need to source the Game Boy and Raspberry Pi yourself.
- arstechnica.com Modder re-creates Game Boy Advance games using the audio from crash sounds
Create a bootable, working Pokémon game by recording it crash multiple times.
-
When You Don't Want Your Games Flush
Not the actual use case for this extender, but I think it's fun that it works on real hardware.
-
Digging into the Analogue Pocket, a portable FPGA game system
YouTube Video
Click to view this content.
-
Pokemon Pinball Generations
Pokemon Pinball Generations (romhack by RainbowDevs)
Custom 3D printed cartridge case
Custom holo-foil label
-
Managed to save a bungled GBA SP board.
Never having had a GBA growing up (or really any gaming system), I recently decided to delve into the retro scene and try to reshell a GBA SP. I bought a board and shell off Aliexpress and a few reproduction cartridges. (VERY) stupidly wanted to test the repo cart without finishing the shell and ripped off the cartridge slot!!!!
After much profanity and months before I could stomach looking at the thing, I buckled down and spent too much buying tools/supplies. Many many many many many Youtube videos later, I finally managed to reseat the slot and connect the damaged pads.
Just thought I'd share that it's possible, having started only with very rudimentary soldering skills.
-
GB USB Smartcard 64M dead?
I have issues mit my GB USB Smartcard 64M. I am using
ems-qart
software under linux. The software doesnt find the card (screenshot attached)This is the message in the terminal:
Failed to open device, libusb error: LIBUSB_ERROR_IO Failed to open device, libusb error: LIBUSB_ERROR_NO_DEVICE Could not find device, is it plugged in?
As I can see with
lsusb
, it is acutally there:Bus 001 Device 009: ID 4670:9394 EMS Production Game Cube USB Memory Adaptor 64M
Starting
ems-qart
as root doesnt solve the issue. I checked the cable, and used three different ones... but always the same behaviour.Any Ideas?
-
Tecmo Bowl, Wordtris, Heavyweight Championship Boxing, and Caesar's Palace are my latest pickups for Game Boy. Did anyone here grow up playing them? :)
YouTube Video
Click to view this content.
-
Nearly all my GameBoy Games
cross-posted from: https://lemmy.world/post/3415897
> Took all my games out of their protective cases and dumped them out on the table. Sometimes it's just satisfying to rummage through a bunch of carts, hold them in your hands, and admire the label art. Does anyone else periodically do this with their physical games?
-
Mail Call!
Finally got around to tracking down Tetris 2, looking forward to digging into it more. Quick pick-up-and-play puzzle games like this are great on the Game Boy. Happy to add this one to the library!
-
I accidentally bought my first counterfeit cartridge! It came REALLY close to fooling me...
At least until I opened it up.
The two numbers at the bottom right of the label were there but they almost looked like they were printed on instead of indented like they were supposed to, which was odd. The lettering on the plastic was SO CLOSE to the original, but the font was just slightly off...
At this point I was still questioning it, because the label had the right amount of wear, and because WHY WOULD SOMEONE COUNTERFEIT BARBIE?? XD But then opening it up confirmed to me that it 100% was counterfeit, I'm guessing a pretty old one.
I made a video demonstrating some of the signs here.
-
I finally got around to making dividers for my Game Boy game collection
It's just index cards cut up and written on with a Sharpie. But it really makes things easier to find. :)
-
If you haven't played it, GB Corp is fun game
It gives you a nice excuse to use all those different Gameboys.
-
New Funny Playing Cart Reader/Writer Available To Purchase
funnyplaying.com Portable Cart Flasher - BurnMasterCustom replaceable housing and compatibility with GBP button replacements Compatible with most self-made cart burning, reading, and writing operations Supports genuine card reading and archive writing 800mAh battery for portable power supply 1-inch OLED screen display for clear visuals Supports syst...
The Burnmaster is no available from their site, along with a MBC3 gbc cart and a 32MB GBA cart. The carts themselves looks like a decent value assuming they work with other writers but the flasher looks a little over priced to me since you have to purchase the case and buttons separately (total $30). The GBxCart RW seems like a better value unless portability and use without a computer a required.
-
Link Port On Super Gameboy
Moving some of my more interesting posts over from reddit. This is a Super Gameboy with a crystal mod and link Port added. I found this pcb, which is either a recreation or upload of this one. Following the steps there I was able to figure out the resistors and diodes to buy and the pins to use. The resistors on the board are marked as 220 and there is a germanium diode.
-
Their Sacrifice Will Be Remembered
I'm building soft mbc5 flashcarts. These games are willing donors to the cause.
-
GBA I modded to match a watch I modded.
I had a really hard time capturing the colors right here for the buttons and the minute hand. In real life, they're much closer than they look here. The GBA has a Funnyplaying IPS, and the watch is a HEAVILY modded Seiko SKX. Honestly, the only things original are the case, crown tube, and bezel at this point.
-
One of my favorite mods.
My Virtual Boy Pocket. Black OEM front shell, red OEM back shell. Glass lens from Bluish Squirrel. It's a red led backlight mod, biverted. I used a 4 position switch and some resistors for 3 levels of brightness and off. Next to it is a BennVenn El Cheapo that my wife was kind enough to make a label for to match the scheme.
The action of the buttons is fantastic on this. However, the red backlight will sear your retinas out if you play too long. A couple of games of Tetris, and the whole world looks green for a while. I think it just adds to the Virtual Boy experience.
-
Flower photo taken on the GameBoy Camera
Recently obtained a GameBoy Camera cartridge; I've been having fun finding things to take pictures of!
-
love the Gameboy Color
One of my Gameboy colors, really liked how this one turned out. Funny playing ips and shell
-
My personal console colection. What's your favourite Gameboy?
I got an atomic purple gameboy color when I was a child along with six games.
In 2015 I found it back in a box and that got me into collecting consoles, games and into modding for few years.
I haven't bought anything regarding gameboy in a while (due prices being crazy mostly 🫤) but though of sharing again to get interesting discussions going on.
What is your favourite console for playing?
For me at home I've used a lot the backlited gameboy advance as it's quite good ergonomic-wise. For commuting I've played usually fire emblem in the GBA SP and the tetris in the pokemon mini, super good ones and battery lasts a lot! 😎
-
Best games for playing on transit?
I play most of my games on the train to work. What are some good games for playing in short bursts? Recently beat Pokemon Red, and lately I've been playing some classic Tetris.
-
Another white build anyone?
These IPS kits make the old gamboys so much more enjoyable. When you get tired of green, just change it to purple or white.