Release PrusaSlicer 2.7.0-alpha1
Summary This is the first alpha release of PrusaSlicer 2.7.0. This release introduces SVG emboss tool, G2/G3 G-codes, binary G-code output, improved UI, editor for custom G-codes and many more sm...
![Release PrusaSlicer 2.7.0-alpha1 · prusa3d/PrusaSlicer](https://iusearchlinux.fyi/pictrs/image/92e98991-8484-48a2-974d-3ae0cb12f2c9.png?format=webp&thumbnail=256)
This is the first alpha release of PrusaSlicer 2.7.0. This release introduces SVG emboss tool, G2/G3 G-codes, binary G-code output, improved UI, editor for custom G-codes and many more smaller improvements and bugfixes.
Firmware 5.1.0-alpha2 needed!
Release 5.1.0-alpha2 Firmware for Original Prusa MINI, MK4, MK3.9 & XL
Summary Input Shaper and Pressure Advance (XL) Firmware update instructions (XL, MK4, MINI) New Binary G-code (XL, MK4, MINI) Cancel object directly on the printer (XL, MK4, MINI) G-code streaming...
![Release 5.1.0-alpha2 Firmware for Original Prusa MINI, MK4, MK3.9 & XL · prusa3d/Prusa-Firmware-Buddy](https://iusearchlinux.fyi/pictrs/image/d2805630-0383-4549-9cf9-37301b12d72d.png?format=webp&thumbnail=256)
- Input Shaper and Pressure Advance (XL)
- Firmware update instructions (XL, MK4, MINI)
- New Binary G-code (XL, MK4, MINI)
- Cancel object directly on the printer (XL, MK4, MINI)
- G-code streaming (XL, MK4, MINI)
- Pre-print screen (XL Multi-Tool)
- Wi-Fi setup with PrusaSlicer (XL, MK4, MINI)
- Faster file transfers (XL, MK4, MINI)
- Set ready (XL, MK4, MINI)
- Updated bootloader (XL, MK4, MINI)
Prusa MINI/MINI+ Firmware 5.1.0-alpha1 with Input Shaping
Summary One codebase to rule them all Input Shaper functionality added Prusa Connect support Known bugs This is the first public release of the 5.1.0-alpha1 firmware for the Original Prusa MINI+ ...
![Release 5.1.0-alpha1 Firmware for Original Prusa MINI · prusa3d/Prusa-Firmware-Buddy](https://iusearchlinux.fyi/pictrs/image/eadcc117-0e44-43f2-954e-49f6238454e7.png?format=webp&thumbnail=256)
Prusa just released an alpha firmware for the Mini with IS/pressure advance features!
Prusa Slicer 2.6.1-rc1 released
Summary This is a first release candidate of PrusaSlicer 2.6.1. This release brings significantly improved Arrange function, new features in the Cut tool, improved embossing on curved surfaces a...
![Release PrusaSlicer 2.6.1-rc1 · prusa3d/PrusaSlicer](https://iusearchlinux.fyi/pictrs/image/4478c412-a135-4671-bbdb-bd419753e8b0.png?format=webp&thumbnail=256)
Added MK4 Input Shaper profiles for other nozzle sizes in Prusa Slicer 2.6
There were new alpha profiles added in v1.9.4 for the following nozzle sizes: 0.25 mm 0.3 mm 0.5 mm 0.6 mm 0.8 mm
It's the old rule-of-cool ;) Not the form follows function you describe. I'm in the same boat - for me it looks cool if you can see why something is there.
I used E16 in early 2000 and it had really cool themes. It was the hot shit right beside the newest xmms skin for your pirated but fully tagged mp3 library (with picard) on your local hard drive.
my librem 5 just sits in my drawer, not usable as a primary smartphone IMHO.
3kg inside Germany, 15kg for the rest of Europe. I'd have to hoard quite a bit to get 15kg of waste filament together..
not to be that guy... but to me it looks like the gunk-accumulator 3000!
is a password change recommended?