cross-posted from: https://lemmy.world/post/1075249

As carbon dioxide continues to build up in the Earth’s atmosphere, research teams around the world have spent years seeking ways to remove the gas efficiently from the air. Meanwhile, the world’s number one “sink” for carbon dioxide from the atmosphere is the ocean, which soaks up some 30 to 40 percent of all of the gas produced by human activities.

Recently, the possibility of removing carbon dioxide directly from ocean water has emerged as another promising possibility for mitigating CO2 emissions, one that could potentially someday even lead to overall net negative emissions. But, like air capture systems, the idea has not yet led to any widespread use, though there are a few companies attempting to enter this area.

Now, a team of researchers at MIT says they may have found the key to a truly efficient and inexpensive removal mechanism. The findings were reported this week in the journal Energy and Environmental Science, in a paper by MIT professors T. Alan Hatton and Kripa Varanasi, postdoc Seoni Kim, and graduate students Michael Nitzsche, Simon Rufer, and Jack Lake.

The existing methods for removing carbon dioxide from seawater apply a voltage across a stack of membranes to acidify a feed stream by water splitting. This converts bicarbonates in the water to molecules of CO2, which can then be removed under vacuum. Hatton, who is the Ralph Landau Professor of Chemical Engineering, notes that the membranes are expensive, and chemicals are required to drive the overall electrode reactions at either end of the stack, adding further to the expense and complexity of the processes. “We wanted to avoid the need for introducing chemicals to the anode and cathode half cells and to avoid the use of membranes if at all possible,” he says.

The team came up with a reversible process consisting of membrane-free electrochemical cells. Reactive electrodes are used to release protons to the seawater fed to the cells, driving the release of the dissolved carbon dioxide from the water. The process is cyclic: It first acidifies the water to convert dissolved inorganic bicarbonates to molecular carbon dioxide, which is collected as a gas under vacuum. Then, the water is fed to a second set of cells with a reversed voltage, to recover the protons and turn the acidic water back to alkaline before releasing it back to the sea. Periodically, the roles of the two cells are reversed once one set of electrodes is depleted of protons (during acidification) and the other has been regenerated during alkalization.

This removal of carbon dioxide and reinjection of alkaline water could slowly start to reverse, at least locally, the acidification of the oceans that has been caused by carbon dioxide buildup, which in turn has threatened coral reefs and shellfish, says Varanasi, a professor of mechanical engineering. The reinjection of alkaline water could be done through dispersed outlets or far offshore to avoid a local spike of alkalinity that could disrupt ecosystems, they say.

“We’re not going to be able to treat the entire planet’s emissions,” Varanasi says. But the reinjection might be done in some cases in places such as fish farms, which tend to acidify the water, so this could be a way of helping to counter that effect.

Once the carbon dioxide is removed from the water, it still needs to be disposed of, as with other carbon removal processes. For example, it can be buried in deep geologic formations under the sea floor, or it can be chemically converted into a compound like ethanol, which can be used as a transportation fuel, or into other specialty chemicals. “You can certainly consider using the captured CO2 as a feedstock for chemicals or materials production, but you’re not going to be able to use all of it as a feedstock,” says Hatton. “You’ll run out of markets for all the products you produce, so no matter what, a significant amount of the captured CO2 will need to be buried underground.”

Initially at least, the idea would be to couple such systems with existing or planned infrastructure that already processes seawater, such as desalination plants. “This system is scalable so that we could integrate it potentially into existing processes that are already processing ocean water or in contact with ocean water,” Varanasi says. There, the carbon dioxide removal could be a simple add-on to existing processes, which already return vast amounts of water to the sea, and it would not require consumables like chemical additives or membranes.

“With desalination plants, you’re already pumping all the water, so why not co-locate there?” Varanasi says. “A bunch of capital costs associated with the way you move the water, and the permitting, all that could already be taken care of.”

The system could also be implemented by ships that would process water as they travel, in order to help mitigate the significant contribution of ship traffic to overall emissions. There are already international mandates to lower shipping’s emissions, and “this could help shipping companies offset some of their emissions, and turn ships into ocean scrubbers,” Varanasi says.

The system could also be implemented at locations such as offshore drilling platforms, or at aquaculture farms. Eventually, it could lead to a deployment of free-standing carbon removal plants distributed globally.

The process could be more efficient than air-capture systems, Hatton says, because the concentration of carbon dioxide in seawater is more than 100 times greater than it is in air. In direct air-capture systems it is first necessary to capture and concentrate the gas before recovering it. “The oceans are large carbon sinks, however, so the capture step has already kind of been done for you,” he says. “There’s no capture step, only release.” That means the volumes of material that need to be handled are much smaller, potentially simplifying the whole process and reducing the footprint requirements.

The research is continuing, with one goal being to find an alternative to the present step that requires a vacuum to remove the separated carbon dioxide from the water. Another need is to identify operating strategies to prevent precipitation of minerals that can foul the electrodes in the alkalinization cell, an inherent issue that reduces the overall efficiency in all reported approaches. Hatton notes that significant progress has been made on these issues, but that it is still too early to report on them. The team expects that the system could be ready for a practical demonstration project within about two years.

“The carbon dioxide problem is the defining problem of our life, of our existence,” Varanasi says. “So clearly, we need all the help we can get.”

The work was supported by ARPA-E.

cross-posted from: https://lemmy.world/post/1075249

As carbon dioxide continues to build up in the Earth’s atmosphere, research teams around the world have spent years seeking ways to remove the gas efficiently from the air. Meanwhile, the world’s number one “sink” for carbon dioxide from the atmosphere is the ocean, which soaks up some 30 to 40 percent of all of the gas produced by human activities.

Recently, the possibility of removing carbon dioxide directly from ocean water has emerged as another promising possibility for mitigating CO2 emissions, one that could potentially someday even lead to overall net negative emissions. But, like air capture systems, the idea has not yet led to any widespread use, though there are a few companies attempting to enter this area.

Now, a team of researchers at MIT says they may have found the key to a truly efficient and inexpensive removal mechanism. The findings were reported this week in the journal Energy and Environmental Science, in a paper by MIT professors T. Alan Hatton and Kripa Varanasi, postdoc Seoni Kim, and graduate students Michael Nitzsche, Simon Rufer, and Jack Lake.

The existing methods for removing carbon dioxide from seawater apply a voltage across a stack of membranes to acidify a feed stream by water splitting. This converts bicarbonates in the water to molecules of CO2, which can then be removed under vacuum. Hatton, who is the Ralph Landau Professor of Chemical Engineering, notes that the membranes are expensive, and chemicals are required to drive the overall electrode reactions at either end of the stack, adding further to the expense and complexity of the processes. “We wanted to avoid the need for introducing chemicals to the anode and cathode half cells and to avoid the use of membranes if at all possible,” he says.

The team came up with a reversible process consisting of membrane-free electrochemical cells. Reactive electrodes are used to release protons to the seawater fed to the cells, driving the release of the dissolved carbon dioxide from the water. The process is cyclic: It first acidifies the water to convert dissolved inorganic bicarbonates to molecular carbon dioxide, which is collected as a gas under vacuum. Then, the water is fed to a second set of cells with a reversed voltage, to recover the protons and turn the acidic water back to alkaline before releasing it back to the sea. Periodically, the roles of the two cells are reversed once one set of electrodes is depleted of protons (during acidification) and the other has been regenerated during alkalization.

This removal of carbon dioxide and reinjection of alkaline water could slowly start to reverse, at least locally, the acidification of the oceans that has been caused by carbon dioxide buildup, which in turn has threatened coral reefs and shellfish, says Varanasi, a professor of mechanical engineering. The reinjection of alkaline water could be done through dispersed outlets or far offshore to avoid a local spike of alkalinity that could disrupt ecosystems, they say.

“We’re not going to be able to treat the entire planet’s emissions,” Varanasi says. But the reinjection might be done in some cases in places such as fish farms, which tend to acidify the water, so this could be a way of helping to counter that effect.

Once the carbon dioxide is removed from the water, it still needs to be disposed of, as with other carbon removal processes. For example, it can be buried in deep geologic formations under the sea floor, or it can be chemically converted into a compound like ethanol, which can be used as a transportation fuel, or into other specialty chemicals. “You can certainly consider using the captured CO2 as a feedstock for chemicals or materials production, but you’re not going to be able to use all of it as a feedstock,” says Hatton. “You’ll run out of markets for all the products you produce, so no matter what, a significant amount of the captured CO2 will need to be buried underground.”

Initially at least, the idea would be to couple such systems with existing or planned infrastructure that already processes seawater, such as desalination plants. “This system is scalable so that we could integrate it potentially into existing processes that are already processing ocean water or in contact with ocean water,” Varanasi says. There, the carbon dioxide removal could be a simple add-on to existing processes, which already return vast amounts of water to the sea, and it would not require consumables like chemical additives or membranes.

“With desalination plants, you’re already pumping all the water, so why not co-locate there?” Varanasi says. “A bunch of capital costs associated with the way you move the water, and the permitting, all that could already be taken care of.”

The system could also be implemented by ships that would process water as they travel, in order to help mitigate the significant contribution of ship traffic to overall emissions. There are already international mandates to lower shipping’s emissions, and “this could help shipping companies offset some of their emissions, and turn ships into ocean scrubbers,” Varanasi says.

The system could also be implemented at locations such as offshore drilling platforms, or at aquaculture farms. Eventually, it could lead to a deployment of free-standing carbon removal plants distributed globally.

The process could be more efficient than air-capture systems, Hatton says, because the concentration of carbon dioxide in seawater is more than 100 times greater than it is in air. In direct air-capture systems it is first necessary to capture and concentrate the gas before recovering it. “The oceans are large carbon sinks, however, so the capture step has already kind of been done for you,” he says. “There’s no capture step, only release.” That means the volumes of material that need to be handled are much smaller, potentially simplifying the whole process and reducing the footprint requirements.

The research is continuing, with one goal being to find an alternative to the present step that requires a vacuum to remove the separated carbon dioxide from the water. Another need is to identify operating strategies to prevent precipitation of minerals that can foul the electrodes in the alkalinization cell, an inherent issue that reduces the overall efficiency in all reported approaches. Hatton notes that significant progress has been made on these issues, but that it is still too early to report on them. The team expects that the system could be ready for a practical demonstration project within about two years.

“The carbon dioxide problem is the defining problem of our life, of our existence,” Varanasi says. “So clearly, we need all the help we can get.”

The work was supported by ARPA-E.

As carbon dioxide continues to build up in the Earth’s atmosphere, research teams around the world have spent years seeking ways to remove the gas efficiently from the air. Meanwhile, the world’s number one “sink” for carbon dioxide from the atmosphere is the ocean, which soaks up some 30 to 40 percent of all of the gas produced by human activities.

Recently, the possibility of removing carbon dioxide directly from ocean water has emerged as another promising possibility for mitigating CO2 emissions, one that could potentially someday even lead to overall net negative emissions. But, like air capture systems, the idea has not yet led to any widespread use, though there are a few companies attempting to enter this area.

Now, a team of researchers at MIT says they may have found the key to a truly efficient and inexpensive removal mechanism. The findings were reported this week in the journal Energy and Environmental Science, in a paper by MIT professors T. Alan Hatton and Kripa Varanasi, postdoc Seoni Kim, and graduate students Michael Nitzsche, Simon Rufer, and Jack Lake.

The existing methods for removing carbon dioxide from seawater apply a voltage across a stack of membranes to acidify a feed stream by water splitting. This converts bicarbonates in the water to molecules of CO2, which can then be removed under vacuum. Hatton, who is the Ralph Landau Professor of Chemical Engineering, notes that the membranes are expensive, and chemicals are required to drive the overall electrode reactions at either end of the stack, adding further to the expense and complexity of the processes. “We wanted to avoid the need for introducing chemicals to the anode and cathode half cells and to avoid the use of membranes if at all possible,” he says.

The team came up with a reversible process consisting of membrane-free electrochemical cells. Reactive electrodes are used to release protons to the seawater fed to the cells, driving the release of the dissolved carbon dioxide from the water. The process is cyclic: It first acidifies the water to convert dissolved inorganic bicarbonates to molecular carbon dioxide, which is collected as a gas under vacuum. Then, the water is fed to a second set of cells with a reversed voltage, to recover the protons and turn the acidic water back to alkaline before releasing it back to the sea. Periodically, the roles of the two cells are reversed once one set of electrodes is depleted of protons (during acidification) and the other has been regenerated during alkalization.

This removal of carbon dioxide and reinjection of alkaline water could slowly start to reverse, at least locally, the acidification of the oceans that has been caused by carbon dioxide buildup, which in turn has threatened coral reefs and shellfish, says Varanasi, a professor of mechanical engineering. The reinjection of alkaline water could be done through dispersed outlets or far offshore to avoid a local spike of alkalinity that could disrupt ecosystems, they say.

“We’re not going to be able to treat the entire planet’s emissions,” Varanasi says. But the reinjection might be done in some cases in places such as fish farms, which tend to acidify the water, so this could be a way of helping to counter that effect.

Once the carbon dioxide is removed from the water, it still needs to be disposed of, as with other carbon removal processes. For example, it can be buried in deep geologic formations under the sea floor, or it can be chemically converted into a compound like ethanol, which can be used as a transportation fuel, or into other specialty chemicals. “You can certainly consider using the captured CO2 as a feedstock for chemicals or materials production, but you’re not going to be able to use all of it as a feedstock,” says Hatton. “You’ll run out of markets for all the products you produce, so no matter what, a significant amount of the captured CO2 will need to be buried underground.”

Initially at least, the idea would be to couple such systems with existing or planned infrastructure that already processes seawater, such as desalination plants. “This system is scalable so that we could integrate it potentially into existing processes that are already processing ocean water or in contact with ocean water,” Varanasi says. There, the carbon dioxide removal could be a simple add-on to existing processes, which already return vast amounts of water to the sea, and it would not require consumables like chemical additives or membranes.

“With desalination plants, you’re already pumping all the water, so why not co-locate there?” Varanasi says. “A bunch of capital costs associated with the way you move the water, and the permitting, all that could already be taken care of.”

The system could also be implemented by ships that would process water as they travel, in order to help mitigate the significant contribution of ship traffic to overall emissions. There are already international mandates to lower shipping’s emissions, and “this could help shipping companies offset some of their emissions, and turn ships into ocean scrubbers,” Varanasi says.

The system could also be implemented at locations such as offshore drilling platforms, or at aquaculture farms. Eventually, it could lead to a deployment of free-standing carbon removal plants distributed globally.

The process could be more efficient than air-capture systems, Hatton says, because the concentration of carbon dioxide in seawater is more than 100 times greater than it is in air. In direct air-capture systems it is first necessary to capture and concentrate the gas before recovering it. “The oceans are large carbon sinks, however, so the capture step has already kind of been done for you,” he says. “There’s no capture step, only release.” That means the volumes of material that need to be handled are much smaller, potentially simplifying the whole process and reducing the footprint requirements.

The research is continuing, with one goal being to find an alternative to the present step that requires a vacuum to remove the separated carbon dioxide from the water. Another need is to identify operating strategies to prevent precipitation of minerals that can foul the electrodes in the alkalinization cell, an inherent issue that reduces the overall efficiency in all reported approaches. Hatton notes that significant progress has been made on these issues, but that it is still too early to report on them. The team expects that the system could be ready for a practical demonstration project within about two years.

“The carbon dioxide problem is the defining problem of our life, of our existence,” Varanasi says. “So clearly, we need all the help we can get.”

The work was supported by ARPA-E.

Hello everybody,

I created this community to give everybody a breath of fresh air in the face of apocalyptic headline after apocalyptic headline. We face serious trouble as a species, but unless we focus our time and energy on solutions, we won't be able to get ourselves out of it. I am certain you feel the same way.

And I want this community to grow, but I can't do it all on my own, and I need your help! If you are interested in finding positive solutions to climate change, and have some moderator experience, please respond and I will get in contact with you.

Have a great day everyone, and remember it's always darkest before the dawn. 🙂

🤔 I legitimately do wonder why stuff like this and support for nuclear energy in general hasn't skyrocketed on account of climate change. It's the one large-scale means that we have to achieve clean energy with current technology, yet I see no governments pushing to replace coal plants with nuclear ones. You'd think the companies who own the coal plants would just accept the writing on the wall and switch to nuclear, if only to save themselves.

There's so much about humanity's tepid response to climate change in general that does not make sense to me, but the fact remains that nuclear is an important tool we have in our toolbox and we desperately need to start using it to prevent the real tragedy of runaway climate collapse.

What do you guys think? Do you think these small modular reactors will take off or nah?

cross-posted from: https://lemmy.world/post/1073592

Researchers have found that one method of reducing greenhouse gas emissions is available, affordable, and capable of being implemented right now. Nitrous oxide, a potent greenhouse gas and ozone-depleting substance, could be readily abated with existing technology applied to industrial sources.

"The urgency of climate change requires that all greenhouse gas emissions be abated as quickly as is technologically and economically feasible," said lead author Eric Davidson, a professor with the University of Maryland Center for Environmental Science. "Limiting nitrous oxide in an agricultural context is complicated, but mitigating it in industry is affordable and available right now. Here is a low-hanging fruit that we can pluck quickly."

When greenhouse gases are released into the atmosphere, they trap the heat from the sun, leading to a warming planet. In terms of emissions, nitrous oxide is third among greenhouse gases, topped only by carbon dioxide and methane. Also known as laughing gas, it has a global warming potential nearly 300 times that of carbon dioxide and stays in the atmosphere for more than 100 years. It also destroys the protective ozone layer in the stratosphere, so reducing nitrous oxide emissions provides a double benefit for the environment and humanity.

Nitrous oxide concentration in the atmosphere has increased at an accelerating rate in recent decades, mostly from increasing agricultural emissions, which contribute about two-thirds of the global human-caused nitrous oxide. However, agricultural sources are challenging to reduce. In contrast, for the industry and energy sectors, low-cost technologies already exist to reduce nitrous oxide emissions to nearly zero.

Industrial nitrous oxide emissions from the chemical industry are primarily by-products from the production of adipic acid (used in the production of nylon) and nitric acid (used to make nitrogen fertilizers, adipic acid, and explosives). Emissions also come from fossil fuel combustion used in manufacturing and internal combustion engines used in cars and trucks.

"We know that abatement is feasible and affordable. The European Union's emissions trading system made it financially attractive to companies to remove nitrous oxide emissions in all adipic acid and nitric acid plants," said co-author Wilfried Winiwarter of the International Institute for Applied Systems Analysis. "The German government is also helping to fund abatement of nitrous oxide emissions from nitric acid plants in several low-income and middle-income countries."

The private sector could also play a key role in nitrous oxide emissions reduction, encouraged by trends in consumer preferences for purchasing climate-friendly products. For example, 65% of the nitrous emissions embodied in nylon products globally are used in passenger cars and light vehicles. Automobile manufacturers could require supply chains to source nylon exclusively from plants that deploy efficient nitrous oxide abatement technology.

cross-posted from: https://lemmy.world/post/1073592

Researchers have found that one method of reducing greenhouse gas emissions is available, affordable, and capable of being implemented right now. Nitrous oxide, a potent greenhouse gas and ozone-depleting substance, could be readily abated with existing technology applied to industrial sources.

"The urgency of climate change requires that all greenhouse gas emissions be abated as quickly as is technologically and economically feasible," said lead author Eric Davidson, a professor with the University of Maryland Center for Environmental Science. "Limiting nitrous oxide in an agricultural context is complicated, but mitigating it in industry is affordable and available right now. Here is a low-hanging fruit that we can pluck quickly."

When greenhouse gases are released into the atmosphere, they trap the heat from the sun, leading to a warming planet. In terms of emissions, nitrous oxide is third among greenhouse gases, topped only by carbon dioxide and methane. Also known as laughing gas, it has a global warming potential nearly 300 times that of carbon dioxide and stays in the atmosphere for more than 100 years. It also destroys the protective ozone layer in the stratosphere, so reducing nitrous oxide emissions provides a double benefit for the environment and humanity.

Nitrous oxide concentration in the atmosphere has increased at an accelerating rate in recent decades, mostly from increasing agricultural emissions, which contribute about two-thirds of the global human-caused nitrous oxide. However, agricultural sources are challenging to reduce. In contrast, for the industry and energy sectors, low-cost technologies already exist to reduce nitrous oxide emissions to nearly zero.

Industrial nitrous oxide emissions from the chemical industry are primarily by-products from the production of adipic acid (used in the production of nylon) and nitric acid (used to make nitrogen fertilizers, adipic acid, and explosives). Emissions also come from fossil fuel combustion used in manufacturing and internal combustion engines used in cars and trucks.

"We know that abatement is feasible and affordable. The European Union's emissions trading system made it financially attractive to companies to remove nitrous oxide emissions in all adipic acid and nitric acid plants," said co-author Wilfried Winiwarter of the International Institute for Applied Systems Analysis. "The German government is also helping to fund abatement of nitrous oxide emissions from nitric acid plants in several low-income and middle-income countries."

The private sector could also play a key role in nitrous oxide emissions reduction, encouraged by trends in consumer preferences for purchasing climate-friendly products. For example, 65% of the nitrous emissions embodied in nylon products globally are used in passenger cars and light vehicles. Automobile manufacturers could require supply chains to source nylon exclusively from plants that deploy efficient nitrous oxide abatement technology.

Researchers have found that one method of reducing greenhouse gas emissions is available, affordable, and capable of being implemented right now. Nitrous oxide, a potent greenhouse gas and ozone-depleting substance, could be readily abated with existing technology applied to industrial sources.

"The urgency of climate change requires that all greenhouse gas emissions be abated as quickly as is technologically and economically feasible," said lead author Eric Davidson, a professor with the University of Maryland Center for Environmental Science. "Limiting nitrous oxide in an agricultural context is complicated, but mitigating it in industry is affordable and available right now. Here is a low-hanging fruit that we can pluck quickly."

When greenhouse gases are released into the atmosphere, they trap the heat from the sun, leading to a warming planet. In terms of emissions, nitrous oxide is third among greenhouse gases, topped only by carbon dioxide and methane. Also known as laughing gas, it has a global warming potential nearly 300 times that of carbon dioxide and stays in the atmosphere for more than 100 years. It also destroys the protective ozone layer in the stratosphere, so reducing nitrous oxide emissions provides a double benefit for the environment and humanity.

Nitrous oxide concentration in the atmosphere has increased at an accelerating rate in recent decades, mostly from increasing agricultural emissions, which contribute about two-thirds of the global human-caused nitrous oxide. However, agricultural sources are challenging to reduce. In contrast, for the industry and energy sectors, low-cost technologies already exist to reduce nitrous oxide emissions to nearly zero.

Industrial nitrous oxide emissions from the chemical industry are primarily by-products from the production of adipic acid (used in the production of nylon) and nitric acid (used to make nitrogen fertilizers, adipic acid, and explosives). Emissions also come from fossil fuel combustion used in manufacturing and internal combustion engines used in cars and trucks.

"We know that abatement is feasible and affordable. The European Union's emissions trading system made it financially attractive to companies to remove nitrous oxide emissions in all adipic acid and nitric acid plants," said co-author Wilfried Winiwarter of the International Institute for Applied Systems Analysis. "The German government is also helping to fund abatement of nitrous oxide emissions from nitric acid plants in several low-income and middle-income countries."

The private sector could also play a key role in nitrous oxide emissions reduction, encouraged by trends in consumer preferences for purchasing climate-friendly products. For example, 65% of the nitrous emissions embodied in nylon products globally are used in passenger cars and light vehicles. Automobile manufacturers could require supply chains to source nylon exclusively from plants that deploy efficient nitrous oxide abatement technology.

cross-posted from: https://lemmy.world/post/1073201

A space solar power prototype has demonstrated its ability to wirelessly beam power through space and direct a detectable amount of energy toward Earth for the first time. The experiment proves the viability of tapping into a near-limitless supply of power in the form of energy from the sun from space.

Because solar energy in space isn’t subject to factors like day and night, obscuration by clouds, or weather on Earth, it is always available. In fact, it is estimated that space-based harvesters could potentially yield eight times more power than solar panels at any location on the surface of the globe.

The wireless power transfer was achieved by the Microwave Array for Power-transfer Low-orbit Experiment (MAPLE), an array of flexible and lightweight microwave power transmitters, which is one of the three instruments carried by the Space Solar Power Demonstrator (SSPD-1).

SSPD-1 was launched in January 2023 as part of the California Institute of Technology's (Caltech) Space Solar Power Project (SSPP), the primary goal of which is to harvest solar power in space and then transmit it to the surface of Earth.

"Through the experiments we have run so far, we received confirmation that MAPLE can transmit power successfully to receivers in space," Co-Director of the Space-Based Solar Power Project, Dr. Ali Hajimiri, said in a statement. "We have also been able to program the array to direct its energy toward Earth, which we detected here at Caltech. We had, of course, tested it on Earth, but now we know that it can survive the trip to space and operate there."

MAPLE demonstrated the transmission of energy wirelessly through space by sending energy from a transmitter to two separate receiver arrays around a foot away, where it was transformed into electricity. This was used to light up a pair of LEDs.

The instrument then beamed energy from a tiny window installed in the unit to the roof of Gordon and Betty Moore Laboratory of Engineering on Caltech’s campus in Pasadena.

Because MAPLE is not sealed, the experiment also demonstrated its capability to function in the harsh environment of space while subject to large swings in temperature and exposure to solar radiation. The conditions experienced by this prototype will soon be felt by large-scale SSPP units.

“To the best of our knowledge, no one has ever demonstrated wireless energy transfer in space, even with expensive rigid structures,” Hajimiri added. “We are doing it with flexible, lightweight structures and with our own integrated circuits. This is a first!”

In a video from Caltech, Hajimiri, who led the Caltech that developed MAPLE, explained how the wireless transmission of energy through space is based on a quantum phenomenon called “interference.”

Interference arises due to the wave-like nature of light. When two light waves overlap, if they are in phase, the waves align, and the peaks of the waves meet and create a greater peak with a height that is the sum of the two original peaks. This is called constructive interference.

If, however, the waves of light are out of phase and overlap while misaligned, a peak may meet a trough in the wave, and both are canceled out, a process known as destructive interference.

"If you have multiple sources that are operating in concert, in the same phase, you can actually direct energy in one direction so all of them will only add in one direction and will cancel each other out in all other directions," Hajimiri said. "The same way that a magnifying glass can focus light into a small point, you can actually control the timing of this in such a way that you can focus all of that energy in a smaller area than the area that you started with."

By precisely controlling the timing of this process, the direction of the energy can be adjusted very rapidly on a scale of nanoseconds, and power can be redirected to space-based receivers or even receivers here on Earth. Together this allows the energy to be directed to the desired location and nowhere else, and all this can be done without the need for any moving mechanical parts.

Hajimiri and his team are now assessing the performance of the individual units that comprise MAPLE. a painstaking process that will take as long as six months to complete. This will allow them to provide feedback that will guide the development of fully realized versions of the system in the future.

It is planned that SSPP will eventually consist of a constellation of modular spacecraft collecting sunlight, transforming it into electricity, and turning this into microwaves that are then beamed over vast distances, including back to Earth, where energy is needed. This could include regions of the globe currently poorly served by existing energy infrastructure.

"In the same way that the internet democratized access to information, we hope that wireless energy transfer democratizes access to energy," Hajimiri concluded. "No energy transmission infrastructure will be needed on the ground to receive this power. That means we can send energy to remote regions and areas devastated by war or natural disaster."

-----------------

Something like this would be really, really great in terms of providing 24/7 solar power without the baggage of battery storage, especially if fusion never pans out. Stuff like this should be up there with nuclear when it comes to this kind of talk, but I don't know if the rest of the world has put 2 and 2 together on it yet.

A space solar power prototype has demonstrated its ability to wirelessly beam power through space and direct a detectable amount of energy toward Earth for the first time. The experiment proves the viability of tapping into a near-limitless supply of power in the form of energy from the sun from space.

Because solar energy in space isn’t subject to factors like day and night, obscuration by clouds, or weather on Earth, it is always available. In fact, it is estimated that space-based harvesters could potentially yield eight times more power than solar panels at any location on the surface of the globe.

The wireless power transfer was achieved by the Microwave Array for Power-transfer Low-orbit Experiment (MAPLE), an array of flexible and lightweight microwave power transmitters, which is one of the three instruments carried by the Space Solar Power Demonstrator (SSPD-1).

SSPD-1 was launched in January 2023 as part of the California Institute of Technology's (Caltech) Space Solar Power Project (SSPP), the primary goal of which is to harvest solar power in space and then transmit it to the surface of Earth.

"Through the experiments we have run so far, we received confirmation that MAPLE can transmit power successfully to receivers in space," Co-Director of the Space-Based Solar Power Project, Dr. Ali Hajimiri, said in a statement. "We have also been able to program the array to direct its energy toward Earth, which we detected here at Caltech. We had, of course, tested it on Earth, but now we know that it can survive the trip to space and operate there."

MAPLE demonstrated the transmission of energy wirelessly through space by sending energy from a transmitter to two separate receiver arrays around a foot away, where it was transformed into electricity. This was used to light up a pair of LEDs.

The instrument then beamed energy from a tiny window installed in the unit to the roof of Gordon and Betty Moore Laboratory of Engineering on Caltech’s campus in Pasadena.

Because MAPLE is not sealed, the experiment also demonstrated its capability to function in the harsh environment of space while subject to large swings in temperature and exposure to solar radiation. The conditions experienced by this prototype will soon be felt by large-scale SSPP units.

“To the best of our knowledge, no one has ever demonstrated wireless energy transfer in space, even with expensive rigid structures,” Hajimiri added. “We are doing it with flexible, lightweight structures and with our own integrated circuits. This is a first!”

In a video from Caltech, Hajimiri, who led the Caltech that developed MAPLE, explained how the wireless transmission of energy through space is based on a quantum phenomenon called “interference.”

Interference arises due to the wave-like nature of light. When two light waves overlap, if they are in phase, the waves align, and the peaks of the waves meet and create a greater peak with a height that is the sum of the two original peaks. This is called constructive interference.

If, however, the waves of light are out of phase and overlap while misaligned, a peak may meet a trough in the wave, and both are canceled out, a process known as destructive interference.

"If you have multiple sources that are operating in concert, in the same phase, you can actually direct energy in one direction so all of them will only add in one direction and will cancel each other out in all other directions," Hajimiri said. "The same way that a magnifying glass can focus light into a small point, you can actually control the timing of this in such a way that you can focus all of that energy in a smaller area than the area that you started with." Related stories

By precisely controlling the timing of this process, the direction of the energy can be adjusted very rapidly on a scale of nanoseconds, and power can be redirected to space-based receivers or even receivers here on Earth. Together this allows the energy to be directed to the desired location and nowhere else, and all this can be done without the need for any moving mechanical parts.

Hajimiri and his team are now assessing the performance of the individual units that comprise MAPLE. a painstaking process that will take as long as six months to complete. This will allow them to provide feedback that will guide the development of fully realized versions of the system in the future.

It is planned that SSPP will eventually consist of a constellation of modular spacecraft collecting sunlight, transforming it into electricity, and turning this into microwaves that are then beamed over vast distances, including back to Earth, where energy is needed. This could include regions of the globe currently poorly served by existing energy infrastructure.

"In the same way that the internet democratized access to information, we hope that wireless energy transfer democratizes access to energy," Hajimiri concluded. "No energy transmission infrastructure will be needed on the ground to receive this power. That means we can send energy to remote regions and areas devastated by war or natural disaster."

---------

Something like this would be really, really great in terms of providing 24/7 solar power without the baggage of battery storage, especially if fusion never pans out. Stuff like this should be up there with nuclear when it comes to this kind of talk, but I don't know if the rest of the world has put 2 and 2 together on it yet.

In Africa, scientists are hard at work restoring land once rich with biodiversity and vegetation. Eleven countries in the Sahel-Sahara region—Djibouti, Eritrea, Ethiopia, Sudan, Chad, Niger, Nigeria, Mali, Burkina Faso, Mauritania, and Senegal—have joined to combat land degradation and restore native plant life to the landscape.

In recent years, northern Africa has seen the quality of arable land decline significantly due to climate change and poor land management. Uniting under the banner of the “Great Green Wall” initiative, national and regional leaders hope to reverse this trend. The bulk of the work on the ground was originally slated to be concentrated along a stretch of land from Djibouti, Djibouti, in the east to Dakar, Senegal, in the west—an expanse 15 kilometers (nine miles) wide and 7,775 kilometers (4,831 miles) long. The project has since expanded to include countries in both northern and western Africa.

Land degradation typically stems from both human-related and natural factors; overfarming, overgrazing, climate change, and extreme weather are the most common causes. Beyond affecting land and the natural environment, land degradation poses serious threats to agricultural productivity, food security, and quality of life. Nowhere is this issue more urgent than in sub-Saharan Africa, where an estimated 500 million people live on land undergoing desertification, the most extreme form of land degradation.

Jean-Marc Sinnassamy is a senior environmental specialist with the Global Environment Facility (GEF). He helps manage a program developed under the Great Green Wall initiative with countries in the Sahel and West Africa. The GEF has been with the initiative since the beginning, helping to convene country leaders at the headquarters of the United Nations Convention to Combat Desertification in Bonn, Germany, in February 2011. The World Bank and other organizations focused on global development and the environment provide financial and technical support.

For Sinnassamy, the partnership represents a unique opportunity to work across the region with a solid political base.

“Here, we saw political leaders, heads of state, ministers in different countries wanting to work on common environmental issues and wanting to tackle land degradation issues together,” he says. “For us, this is a political blessing. We have to respond to this demand, and we have to capitalize on that.”

Integrated Landscape Approach

Beyond the project’s strong political foundation, its carefully crafted approach brings environmental benefits both locally and globally. The initiative uses an “integrated landscape approach” that allows each country to address land degradation, climate change adaptation and mitigation, biodiversity, and forestry within its local context.

“In this case, working to combat land degradation is the best way to address both very local issues and improve the global environment,” Sinnassamy says. “We are working with the land, which is the basis of livelihood in these communities. We are working with people to improve soil quality, which improves crop yield and in turn agricultural production and the overall quality of life in the community. These very local benefits are also a way to generate global benefits for water, land, and nature.”

In the end, Sinnassamy hopes the region as a whole will be composed of a “mosaic of landscapes” that increases biodiversity and maintains native flora as part of agricultural land. Each participating country has its own individual goals, which include reducing erosion, diversifying income, increasing crop yield, and improving soil fertility.

While trees and forests are only part of the focus of the Great Green Wall initiative, many in the media have cast the project as solely a tree-planting project and an attempt to halt the southward expansion of the Sahara Desert.

Sinnassamy is quick to point out two faults in this perception. The first is that the Great Green Wall initiative is much more nuanced than simply planting a belt of trees across the continent.

“Behind the name or the brand ‘Great Green Wall,’ different people see different things. Some people saw just a stripe of trees from east to west, but that has never been our vision,” he says. “In Niger, Mali, and Burkina Faso . . . natural regeneration managed by farmers has yielded great results. We want to replicate and scale up these achievements across the region. It’s very possible to restore trees to a landscape and to restore agroforestry practices without planting any trees. This is also a sustainable way of regenerating agroforestry and parkland.”

The second misperception Sinnassamy points to is that the Sahara Desert is not, in fact, expanding.

“We are not fighting the desert,” he says. “In the majority of the areas we are working in these 11 countries, the desert is not advancing. The [Sahara] Desert is a very stable ecosystem. Of course, there are some areas on the margins—for instance in Senegal, Mauritania, and Nigeria—where there are some sand movements. But from a geographic perspective, over time the desert has been relatively stable in this area.”

What Will It Take to ‘Build the Wall?'

Having spent the better part of a year planning, strategizing, and building partnerships with agencies on the ground, the Great Green Wall initiative is beginning to report positive early results. The project’s $2 billion budget, stemming largely from World Bank co-financing and partnerships fostered by the African Union, ensures participating countries will have the means to see the project through to the end.

Examples of success include more than 50,000 acres of trees planted in Senegal. Most of these are the acacia species Senegalia senegal, which has economic value for the commodity it produces, gum arabic. (Gum arabic is primarily used as a food additive.) A small portion of the trees are also fruit-bearing, which, when mature, will help combat the high levels of malnutrition in the country’s rural interior.

Even more dramatic is the project’s potential social impact. The BBC reports that the improvements in land quality and economic opportunity in Mali may help curb terrorism in the country, where famine and poverty have exacerbated a spike in political and religious extremism.

Marginal improvements to agricultural soils around the world would store enough carbon to keep the world within 1.5C of global heating, new research suggests.

Farming techniques that improve long-term fertility and yields can also help to store more carbon in soils but are often ignored in favour of intensive techniques using large amounts of artificial fertiliser, much of it wasted, that can increase greenhouse gas emissions.

Using better farming techniques to store 1% more carbon in about half of the world’s agricultural soils would be enough to absorb about 31 gigatonnes of carbon dioxide a year, according to new data. That amount is not far off the 32 gigatonnes gap between current planned emissions reduction globally per year and the amount of carbon that must be cut by 2030 to stay within 1.5C.

The estimates were carried out by Jacqueline McGlade, the former chief scientist at the UN environment programme and former executive director of the European Environment Agency. She found that storing more carbon in the top 30cm of agricultural soils would be feasible in many regions where soils are currently degraded.

McGlade now leads a commercial organisation that sells soil data to farmers. Downforce Technologies uses publicly available global data, satellite images and lidar to assess in detail how much carbon is stored in soils, which can now be done down to the level of individual fields.

“Outside the farming sector, people do not understand how important soils are to the climate,” said McGlade. “Changing farming could make soils carbon negative, making them absorb carbon, and reducing the cost of farming.”

She said farmers could face a short-term cost while they changed their methods, away from the overuse of artificial fertiliser, but after a transition period of two to three years their yields would improve and their soils would be much healthier.

She estimated it would cost about $1m (£790,000) to restore 40,000 hectares (99,000 acres) of what is currently badly degraded farmland in Kenya, an area that is home to about 300,000 people.

Downforce data could also allow farmers to sell carbon credits based on how much additional carbon dioxide their fields are absorbing. Soil has long been known to be one of Earth’s biggest stores of carbon, but until now it has not been possible to examine in detail how much carbon soils in particular areas are locking up and how much they are emitting. About 40% of the world’s farmland is now degraded, according to UN estimates.

Carbon dioxide removal, the name given to a suite of technologies and techniques that increase the uptake of carbon dioxide from the air and sequester the carbon in some form, is an increasing area of interest, as the world slips closer to the critical threshold of 1.5C of global heating above pre-industrial levels.

Arable farmers could sequester more carbon within their soils by changing their crop rotation, planting cover crops such as clover, or using direct drilling, which allows crops to be planted without the need for ploughing. Livestock farmers could improve their soils by growing more native grasses.

Hedgerows also help to sequester carbon in the soil, because they have large underground networks of mycorrhizal fungi and microbes that can extend metres into the field. Farmers have spent decades removing hedgerows to make intensive farming easier, but restoring them, and maintaining existing hedgerows, would improve biodiversity, reduce the erosion of topsoil, and help to stop harmful agricultural runoff, which is a key polluter of rivers.

cross-posted from: https://lemmy.world/post/1072810

Marginal improvements to agricultural soils around the world would store enough carbon to keep the world within 1.5C of global heating, new research suggests.

Farming techniques that improve long-term fertility and yields can also help to store more carbon in soils but are often ignored in favour of intensive techniques using large amounts of artificial fertiliser, much of it wasted, that can increase greenhouse gas emissions.

Using better farming techniques to store 1% more carbon in about half of the world’s agricultural soils would be enough to absorb about 31 gigatonnes of carbon dioxide a year, according to new data. That amount is not far off the 32 gigatonnes gap between current planned emissions reduction globally per year and the amount of carbon that must be cut by 2030 to stay within 1.5C.

The estimates were carried out by Jacqueline McGlade, the former chief scientist at the UN environment programme and former executive director of the European Environment Agency. She found that storing more carbon in the top 30cm of agricultural soils would be feasible in many regions where soils are currently degraded.

McGlade now leads a commercial organisation that sells soil data to farmers. Downforce Technologies uses publicly available global data, satellite images and lidar to assess in detail how much carbon is stored in soils, which can now be done down to the level of individual fields.

“Outside the farming sector, people do not understand how important soils are to the climate,” said McGlade. “Changing farming could make soils carbon negative, making them absorb carbon, and reducing the cost of farming.”

She said farmers could face a short-term cost while they changed their methods, away from the overuse of artificial fertiliser, but after a transition period of two to three years their yields would improve and their soils would be much healthier.

She estimated it would cost about $1m (£790,000) to restore 40,000 hectares (99,000 acres) of what is currently badly degraded farmland in Kenya, an area that is home to about 300,000 people.

Downforce data could also allow farmers to sell carbon credits based on how much additional carbon dioxide their fields are absorbing. Soil has long been known to be one of Earth’s biggest stores of carbon, but until now it has not been possible to examine in detail how much carbon soils in particular areas are locking up and how much they are emitting. About 40% of the world’s farmland is now degraded, according to UN estimates.

Carbon dioxide removal, the name given to a suite of technologies and techniques that increase the uptake of carbon dioxide from the air and sequester the carbon in some form, is an increasing area of interest, as the world slips closer to the critical threshold of 1.5C of global heating above pre-industrial levels.

Arable farmers could sequester more carbon within their soils by changing their crop rotation, planting cover crops such as clover, or using direct drilling, which allows crops to be planted without the need for ploughing. Livestock farmers could improve their soils by growing more native grasses.

Hedgerows also help to sequester carbon in the soil, because they have large underground networks of mycorrhizal fungi and microbes that can extend metres into the field. Farmers have spent decades removing hedgerows to make intensive farming easier, but restoring them, and maintaining existing hedgerows, would improve biodiversity, reduce the erosion of topsoil, and help to stop harmful agricultural runoff, which is a key polluter of rivers.

Marginal improvements to agricultural soils around the world would store enough carbon to keep the world within 1.5C of global heating, new research suggests.

Farming techniques that improve long-term fertility and yields can also help to store more carbon in soils but are often ignored in favour of intensive techniques using large amounts of artificial fertiliser, much of it wasted, that can increase greenhouse gas emissions.

Using better farming techniques to store 1% more carbon in about half of the world’s agricultural soils would be enough to absorb about 31 gigatonnes of carbon dioxide a year, according to new data. That amount is not far off the 32 gigatonnes gap between current planned emissions reduction globally per year and the amount of carbon that must be cut by 2030 to stay within 1.5C.

The estimates were carried out by Jacqueline McGlade, the former chief scientist at the UN environment programme and former executive director of the European Environment Agency. She found that storing more carbon in the top 30cm of agricultural soils would be feasible in many regions where soils are currently degraded.

McGlade now leads a commercial organisation that sells soil data to farmers. Downforce Technologies uses publicly available global data, satellite images and lidar to assess in detail how much carbon is stored in soils, which can now be done down to the level of individual fields.

“Outside the farming sector, people do not understand how important soils are to the climate,” said McGlade. “Changing farming could make soils carbon negative, making them absorb carbon, and reducing the cost of farming.”

She said farmers could face a short-term cost while they changed their methods, away from the overuse of artificial fertiliser, but after a transition period of two to three years their yields would improve and their soils would be much healthier.

She estimated it would cost about $1m (£790,000) to restore 40,000 hectares (99,000 acres) of what is currently badly degraded farmland in Kenya, an area that is home to about 300,000 people.

Downforce data could also allow farmers to sell carbon credits based on how much additional carbon dioxide their fields are absorbing. Soil has long been known to be one of Earth’s biggest stores of carbon, but until now it has not been possible to examine in detail how much carbon soils in particular areas are locking up and how much they are emitting. About 40% of the world’s farmland is now degraded, according to UN estimates.

Carbon dioxide removal, the name given to a suite of technologies and techniques that increase the uptake of carbon dioxide from the air and sequester the carbon in some form, is an increasing area of interest, as the world slips closer to the critical threshold of 1.5C of global heating above pre-industrial levels.

Arable farmers could sequester more carbon within their soils by changing their crop rotation, planting cover crops such as clover, or using direct drilling, which allows crops to be planted without the need for ploughing. Livestock farmers could improve their soils by growing more native grasses.

Hedgerows also help to sequester carbon in the soil, because they have large underground networks of mycorrhizal fungi and microbes that can extend metres into the field. Farmers have spent decades removing hedgerows to make intensive farming easier, but restoring them, and maintaining existing hedgerows, would improve biodiversity, reduce the erosion of topsoil, and help to stop harmful agricultural runoff, which is a key polluter of rivers.

cross-posted from: https://lemmy.world/post/1070394

Gay Republicans are abandoning Florida Gov. and 2024 presidential candidate Ron DeSantis (R) in droves after his rapid response team shared a bizarre video bragging about his reign of terror against the LGBTQ+ community.

The video opens with several clips of Donald Trump – DeSantis’s top primary opponent – expressing support for LGBTQ+ people and frames these comments as damning. Most of the comments are from before he was elected president in 2016. Then, the clip abruptly shifts to intense music and a photo of DeSantis shooting lasers out of his eyes, followed by snapshots of headlines about the anti-LGBTQ+ laws DeSantis has passed.

The video proudly shares that DeSantis has been called “evil,” “dangerous,” “draconian,” and “public enemy no. 1” and even includes a clip accusing DeSantis of passing legislation “that literally threatens trans existence.” It also contains images of shirtless buff muscle men inter-spliced with these statements about how DeSantis is hurting LGBTQ+ people in his state.

And despite DeSantis’s years-long crusade against LGBTQ+ people, this video, for whatever reason, seems to be the last straw for gay conservatives who had formerly viewed the Florida governor as a palatable alternative to Trump.

“Not only did DeSantis show that he is as anti-LGBTQ+ as the mainstream media has alleged, he made a mockery of any GOP candidate that shows an interest in LGBTQ+ rights, setting the whole party back decades,” wrote Yvonne Dean-Bailey, former Republican state legislator in New Hampshire, in an op-ed for the Daily Beast.

Dean-Bailey called the video “the most anti-LGBTQ+ ad in recent history,” adding that his actions “tarnish the image of the conservative movement.”

“As a lifelong conservative, I believe in the principles of limited government, personal responsibility, and individual liberties. Yet, DeSantis’ approach to LGBTQ+ issues goes against these very principles.”

Well-known conservative activist David Leatherwood also shared his disappointment over the ad on Twitter.

“I spent the last 7 years of my life working with Trump to make the GOP a more welcoming place for gays WHILE ALSO being anti-groomer, anti-woke and pro religious liberty. I’ve even worked WITH DeSantis on this agenda. This ad is a slap in the face, and makes any LGBT person supporting DeSantis look like an absolute idiot.”

Even disgraced gay Rep. George Santos (R-NY) got in on the anti-DeSantis action. Santos – who is currently facing 13 criminal charges – told The Hill he “used to think DeSantis was a great governor” but is now “starting to think differently.”

Santos has long been on team Trump but spoke out in favor of DeSantis’s Don’t Say Gay law. “I still stand by the bill in its nature,” he said, “but now it seems that it had a more perverse agenda behind it.”

“I’m starting to see [DeSantis] for what he is,” Santos added. “His rhetoric is to diminish and remove rights away from people like myself, and I can’t support that.”

The LGBTQ+ conservative group Log Cabin Republicans criticized the ad as “divisive and desperate.”

“Conservatives understand that we need to protect our kids, preserve women’s sports, safeguard women’s spaces and strengthen parental rights,” the group said in a statement, “but Ron DeSantis’ extreme rhetoric has just ventured into homophobic territory.”

“Ron DeSantis and his team can’t tell the difference between commonsense gays and the radical Left gays. He, sadly, sees them all the same. His naive policy positions are dangerous and politically stupid.”

And it isn’t just gay Republicans speaking out against the ad. DeSantis has been slammed and mocked from all angles.

The New Republic published a piece positing it could be “the weirdest ad in American political history.”

And out Secretary of Transportation Pete Buttigieg pointed out the “strangeness of trying to prove your manhood by putting up a video that splices images of you in between oiled-up shirtless bodybuilders” before blasting DeSantis for focusing on bullying marginalized groups rather than helping Americans.

Christina Pushaw, the DeSantis campaign’s Rapid Response director, defended the video on Twitter after former Trump official Richard Grenell called it “undeniably homophobic.”

“Opposing the federal recognition of ‘Pride Month’ isn’t ‘homophobic.’ We wouldn’t support a month to celebrate straight people for sexual orientation, either… It’s unnecessary, divisive, pandering. In a country as vast and diverse as the USA, identity politics is poison.”

DeSantis is currently in a distant second place in 2024 Republican primary polling, getting an average of 21.5% support in recent polls, according to RealClearPolitics. Trump is first with an average of 52.4%.

Gay Republicans are abandoning Florida Gov. and 2024 presidential candidate Ron DeSantis (R) in droves after his rapid response team shared a bizarre video bragging about his reign of terror against the LGBTQ+ community.

The video opens with several clips of Donald Trump – DeSantis’s top primary opponent – expressing support for LGBTQ+ people and frames these comments as damning. Most of the comments are from before he was elected president in 2016. Then, the clip abruptly shifts to intense music and a photo of DeSantis shooting lasers out of his eyes, followed by snapshots of headlines about the anti-LGBTQ+ laws DeSantis has passed.

The video proudly shares that DeSantis has been called “evil,” “dangerous,” “draconian,” and “public enemy no. 1” and even includes a clip accusing DeSantis of passing legislation “that literally threatens trans existence.” It also contains images of shirtless buff muscle men inter-spliced with these statements about how DeSantis is hurting LGBTQ+ people in his state.

And despite DeSantis’s years-long crusade against LGBTQ+ people, this video, for whatever reason, seems to be the last straw for gay conservatives who had formerly viewed the Florida governor as a palatable alternative to Trump.

“Not only did DeSantis show that he is as anti-LGBTQ+ as the mainstream media has alleged, he made a mockery of any GOP candidate that shows an interest in LGBTQ+ rights, setting the whole party back decades,” wrote Yvonne Dean-Bailey, former Republican state legislator in New Hampshire, in an op-ed for the Daily Beast.

Dean-Bailey called the video “the most anti-LGBTQ+ ad in recent history,” adding that his actions “tarnish the image of the conservative movement.”

“As a lifelong conservative, I believe in the principles of limited government, personal responsibility, and individual liberties. Yet, DeSantis’ approach to LGBTQ+ issues goes against these very principles.”

Well-known conservative activist David Leatherwood also shared his disappointment over the ad on Twitter.

“I spent the last 7 years of my life working with Trump to make the GOP a more welcoming place for gays WHILE ALSO being anti-groomer, anti-woke and pro religious liberty. I’ve even worked WITH DeSantis on this agenda. This ad is a slap in the face, and makes any LGBT person supporting DeSantis look like an absolute idiot.”

Even disgraced gay Rep. George Santos (R-NY) got in on the anti-DeSantis action. Santos – who is currently facing 13 criminal charges – told The Hill he “used to think DeSantis was a great governor” but is now “starting to think differently.”

Santos has long been on team Trump but spoke out in favor of DeSantis’s Don’t Say Gay law. “I still stand by the bill in its nature,” he said, “but now it seems that it had a more perverse agenda behind it.”

“I’m starting to see [DeSantis] for what he is,” Santos added. “His rhetoric is to diminish and remove rights away from people like myself, and I can’t support that.”

The LGBTQ+ conservative group Log Cabin Republicans criticized the ad as “divisive and desperate.”

“Conservatives understand that we need to protect our kids, preserve women’s sports, safeguard women’s spaces and strengthen parental rights,” the group said in a statement, “but Ron DeSantis’ extreme rhetoric has just ventured into homophobic territory.”

“Ron DeSantis and his team can’t tell the difference between commonsense gays and the radical Left gays. He, sadly, sees them all the same. His naive policy positions are dangerous and politically stupid.”

And it isn’t just gay Republicans speaking out against the ad. DeSantis has been slammed and mocked from all angles.

The New Republic published a piece positing it could be “the weirdest ad in American political history.”

And out Secretary of Transportation Pete Buttigieg pointed out the “strangeness of trying to prove your manhood by putting up a video that splices images of you in between oiled-up shirtless bodybuilders” before blasting DeSantis for focusing on bullying marginalized groups rather than helping Americans.

Christina Pushaw, the DeSantis campaign’s Rapid Response director, defended the video on Twitter after former Trump official Richard Grenell called it “undeniably homophobic.”

“Opposing the federal recognition of ‘Pride Month’ isn’t ‘homophobic.’ We wouldn’t support a month to celebrate straight people for sexual orientation, either… It’s unnecessary, divisive, pandering. In a country as vast and diverse as the USA, identity politics is poison.”

DeSantis is currently in a distant second place in 2024 Republican primary polling, getting an average of 21.5% support in recent polls, according to RealClearPolitics. Trump is first with an average of 52.4%.

In state after state, conservative lawmakers this year have banned medical treatment designed for transgender youth dealing with changes in their gender identity. Now, a growing number of federal judges are blocking those laws from taking effect.

US district court judges have halted such laws in six states so far – Alabama, Arkansas, Florida, Indiana, Kentucky and Tennessee – finding that they infringe on the constitutional guarantee to equal protection under the 14th amendment to the US constitution. John Wieners.

Two lawsuits challenging laws in Montana and Georgia have yet to be ruled on, and in Oklahoma the opposing sides in May agreed to set aside the law until the court case is heard.

The court rulings offer temporary relief from the recent rush of bills banning transgender youth from receiving treatments such as puberty blockers and hormone therapy. Twenty states have passed such bans, with the bulk of them signed into law this year.

“It’s quite noteworthy that the results in these cases have so far been so consistent,” said Tobias Wolff, a University of Pennsylvania law professor specializing in constitutional law and LGBTQ rights. “And it’s not because the law in this area was such a slam-dunk. It’s because the facts are so clearly against these laws.”

Many conservative lawmakers have endorsed the laws as part of an effort to defend traditional conservative values and portray progressives as out of touch on issues of sex and religion.

Democrats, LGBTQ advocacy groups and health providers say the bans unjustly target a community for whom gender-affirming care can be life-saving and which is under attack.

“The courts are starting to find very consistently that these laws are ridiculous,” said Kevin Jennings, chief executive of Lambda Legal, a civil rights organization focused on LGBTQ issues. “They violate the equal protection clause, they’re motivated by animus not science and they serve no state interest.”

Judges, including three appointed by Republican former US president Donald Trump, have found that gender-affirming care is medically necessary for transgender youth suffering from gender dysphoria – the stress caused by the divergence between one’s gender identity and sex assigned at birth.

The judges also have said laws banning such care violate a parent’s right to make healthcare decisions for their children.

“Courts are really taking time to understand and recognize the humanity of the families and children impacted by these bans,” said Cynthia Cheng-Wun Weaver, litigation director for the Human Rights Campaign, the largest LGBTQ advocacy in the United States.

Supporters of the laws are undeterred, saying courts have erred and that the prevailing medical consensus will change.

DENVER — A Colorado web designer who the U.S. Supreme Court ruled Friday could refuse to make wedding websites for gay couples cited a request from a man who says he never asked to work with her.

The request in dispute, from a person identified as "Stewart," wasn't the basis for the federal lawsuit filed preemptively seven years ago by web designer Lorie Smith, before she started making wedding websites. But as the case advanced, it was referenced by her attorneys when lawyers for the state of Colorado pressed Smith on whether she had sufficient grounds to sue.

The revelation distracts from Smith's victory at a time when she might have been basking in her win, which is widely considered a setback for gay rights.

Smith named Stewart — and included a website service request from him, listing his phone number and email address in 2017 court documents. But Stewart told The Associated Press he never submitted the request and didn't know his name was invoked in the lawsuit until he was contacted this week by a reporter from The New Republic, which first reported his denial.

"I was incredibly surprised given the fact that I've been happily married to a woman for the last 15 years," said Stewart, who declined to give his last name for fear of harassment and threats. His contact information, but not his last name, were listed in court documents.

He added that he was a designer and "could design my own website if I need to" — and was concerned no one had checked into the validity of the request cited by Smith until recently.

Smith's lawyer, Kristen Waggoner, said at a Friday news conference that the wedding request naming Stewart was submitted through Smith's website and denied it was fabricated.

She suggested it could have been a troll making the request, something that's happened with other clients she has represented. In 2018 her client Colorado baker Jack Phillips won a partial U.S. Supreme Court victory after refusing to make a gay couple's wedding cake, citing his Christian faith.

"It's undisputed that the request was received," Waggoner said. "Whether that was a troll and not a genuine request, or it was someone who was looking for that, is really irrelevant to the case."

Colorado Attorney General Phil Weiser on Friday called the lawsuit a "made up case" because Smith wasn't offering wedding website services when the suit was filed.

Weiser didn't know the specifics of Stewart's denial, but said the nation's high court should not have addressed the lawsuit's merits "without any basis in reality."

About a month after the case was filed in federal court challenging an anti-discrimination law in Colorado, lawyers for the state said Smith had not been harmed by the law as they moved to dismiss the case.

Her lawyers maintained Smith did not have to be punished for violating the law before challenging it. In February 2017 they said even though she did not need a request in order to pursue the case, she had received one.

"Any claim that Lorie will never receive a request to create a custom website celebrating a same-sex ceremony is no longer legitimate because Lorie has received such a request," they said.

Smith's Supreme Court filings briefly mentioned she received at least one request to create a website celebrating the wedding of a same-sex couple. There did not appear to be any reference to the issue in the court's decision.

cross-posted from: https://lemmy.world/post/919035

In 2018, the lesbian activist Urvashi Vaid embarked on what would become her final project before her death in 2022.

From 1989 to 1992 Vaid served as the executive director of the National Gay and Lesbian Task Force — now the National LGBTQ Task Force — and was the first woman of color to lead the organization.

She was a fierce activist during the HIV/AIDS crisis and went on to start the first lesbian political action committee, served on the boards of ACLU and Planned Parenthood, and even co-founded the American LGBTQ+ Museum of History and Culture.

Vaid had realized there wasn’t robust research about the discrimination and violence LGBTQ+ women were facing, says Jaime Grant, a sex educator and activist who collaborated with Vaid.

So Grant and Vaid, along with 22 other scholars and activists, got together and developed a nationwide survey of LGBTQ+ women’s lives and experiences with disability, discrimination, harassment and intimate partner violence.

Over the course of two years, they surveyed more than 8,000 people who either currently identify or previously identified as a woman about what life looks like for LGBTQ+ women who partner with women in the U.S.

The executive summary of the survey report, entitled “We Never Give Up the Fight: A Report of the National LGBTQ+ Women’s Community Survey,” was released this week. It found that while LGBTQ+ women experience high rates of violence in multiple areas of their lives, they regularly rely on their friends, not institutions – such as the education system, law enforcement, or religious organizations – for support.

Specifically, 76% of respondents reported experiencing harassment, discrimination, or violence in educational settings, and 43% said their childhood faith traditions became a source of conflict because of their identity as an LGBTQ+ woman.

“Across the board, institutions that are critical to our well-being are failing us,” says Grant.

According to the survey, LGBTQ+ women experience intimate partner violence at higher rates than women in the general population, with 47% of respondents reporting experiences with emotional violence – defined as gaslighting, control over social life, or isolation from family – as well as physical, or sexual violence from their partner.

One of the rich pieces of data the survey provides is more information about who is doing the abusing and how. “We actually know very little about the people who are being abusive,” says anti-violence advocate Shannon Perez-Darby, who helped the team of researchers make sense of the survey data for the intimate partner violence section. Having a better understanding of both the abused and the abuser will help advocates against domestic violence and healthcare providers offer better support to survivors of intimate partner violence.

In the intimate partner violence section, respondents gave details about their abusers, no matter the gender or sexuality. “Many lesbian identified people in the study had children with cisgender, heterosexual men and left marriages,” explains Grant.

The results showed that cisgender, heterosexual men use more lethal forms of violence that have a bigger impact on someone’s ability to stay alive. In contrast, women and gender-diverse people use more social control as a form of violence, the survey found.

“We did see differences from the survey data that was telling us that the kinds of harms that cisgendered men were causing to their queer female partners was different than the kinds of harms that queer women who were being abusive were enacting on their partners,” says Perez-Darby.

Perez-Darby warns against making simple conclusions about patterns of abuse across gender simply based on the findings of the survey. “The impact of domestic violence was equally crushing to their lives,” says Perez-Darby, “No matter the gender or sexual orientation of the partner who was abusing them.”

Grant hopes that this data can serve as the grounds for education campaigns in healthcare settings where doctors may come in contact with different types of domestic violence survivors, as well as in the broader LGBTQ+ community.

The report also shows that only 20% of domestic violence survivors sought support from institutions – such as hospitals, domestic violence shelters or the police – whereas more than half of survivors did not look for help in these spaces and instead relied on their friends.

Therein lies the potential solution for this problem. “The most consistent aspect of domestic violence is isolation,” says Perez-Darby. “If there was one thing we could all do, it would be to stay better connected to our people, to our friends, and to our family.” The strong value that LGBTQ+ people place on their queer and trans communities is what Perez-Darby calls a “resiliency that can help us prevent domestic violence.”

The survey also gives insight into the joy and resilience that exist in the LGBTQ+ community.

One of the surprising results from the survey for Grant was that gender and sexuality remain fluid and changing for LGBTQ+ women. 24% of respondents reported their gender as “fluid or changing” and 32% described their sexuality as “fluid or changing.” “LGBTQ+ women’s identities across the board are very expansive,” says Grant.

This fluidity “reflects how things are changing in our society in terms of understanding nuances in gender and sexuality,” says Amanda Pollitt, an assistant professor at the Center for Health Equity Research at Northern Arizona University. “I wasn’t really expecting to see quite so much diversity and especially gender identities.”

One of the last questions of the survey asked: “What are your favorite things about being an LGBTQ+ woman?”

Of the 21,000 answers from 7,000 respondents, Grant says what people love is self-determination, community and the freedom to choose who they want to be with. For Perez-Darby, the survey underscores “the resiliency of queer and trans communities, how we have held each other, and all the different ways we figure out how to be in relationship with each other to survive and thrive.”

In 2018, the lesbian activist Urvashi Vaid embarked on what would become her final project before her death in 2022.

From 1989 to 1992 Vaid served as the executive director of the National Gay and Lesbian Task Force — now the National LGBTQ Task Force — and was the first woman of color to lead the organization.

She was a fierce activist during the HIV/AIDS crisis and went on to start the first lesbian political action committee, served on the boards of ACLU and Planned Parenthood, and even co-founded the American LGBTQ+ Museum of History and Culture.

Vaid had realized there wasn't robust research about the discrimination and violence LGBTQ+ women were facing, says Jaime Grant, a sex educator and activist who collaborated with Vaid.

So Grant and Vaid, along with 22 other scholars and activists, got together and developed a nationwide survey of LGBTQ+ women's lives and experiences with disability, discrimination, harassment and intimate partner violence.

Over the course of two years, they surveyed more than 8,000 people who either currently identify or previously identified as a woman about what life looks like for LGBTQ+ women who partner with women in the U.S.

The executive summary of the survey report, entitled "We Never Give Up the Fight: A Report of the National LGBTQ+ Women's Community Survey," was released this week. It found that while LGBTQ+ women experience high rates of violence in multiple areas of their lives, they regularly rely on their friends, not institutions – such as the education system, law enforcement, or religious organizations – for support.

Specifically, 76% of respondents reported experiencing harassment, discrimination, or violence in educational settings, and 43% said their childhood faith traditions became a source of conflict because of their identity as an LGBTQ+ woman.

"Across the board, institutions that are critical to our well-being are failing us," says Grant.

According to the survey, LGBTQ+ women experience intimate partner violence at higher rates than women in the general population, with 47% of respondents reporting experiences with emotional violence – defined as gaslighting, control over social life, or isolation from family – as well as physical, or sexual violence from their partner.

One of the rich pieces of data the survey provides is more information about who is doing the abusing and how. "We actually know very little about the people who are being abusive," says anti-violence advocate Shannon Perez-Darby, who helped the team of researchers make sense of the survey data for the intimate partner violence section. Having a better understanding of both the abused and the abuser will help advocates against domestic violence and healthcare providers offer better support to survivors of intimate partner violence.

In the intimate partner violence section, respondents gave details about their abusers, no matter the gender or sexuality. "Many lesbian identified people in the study had children with cisgender, heterosexual men and left marriages," explains Grant.

The results showed that cisgender, heterosexual men use more lethal forms of violence that have a bigger impact on someone's ability to stay alive. In contrast, women and gender-diverse people use more social control as a form of violence, the survey found.

"We did see differences from the survey data that was telling us that the kinds of harms that cisgendered men were causing to their queer female partners was different than the kinds of harms that queer women who were being abusive were enacting on their partners," says Perez-Darby.

Perez-Darby warns against making simple conclusions about patterns of abuse across gender simply based on the findings of the survey. "The impact of domestic violence was equally crushing to their lives," says Perez-Darby, "No matter the gender or sexual orientation of the partner who was abusing them."

Grant hopes that this data can serve as the grounds for education campaigns in healthcare settings where doctors may come in contact with different types of domestic violence survivors, as well as in the broader LGBTQ+ community.

The report also shows that only 20% of domestic violence survivors sought support from institutions – such as hospitals, domestic violence shelters or the police – whereas more than half of survivors did not look for help in these spaces and instead relied on their friends.

Therein lies the potential solution for this problem. "The most consistent aspect of domestic violence is isolation," says Perez-Darby. "If there was one thing we could all do, it would be to stay better connected to our people, to our friends, and to our family." The strong value that LGBTQ+ people place on their queer and trans communities is what Perez-Darby calls a "resiliency that can help us prevent domestic violence."

The survey also gives insight into the joy and resilience that exist in the LGBTQ+ community.

One of the surprising results from the survey for Grant was that gender and sexuality remain fluid and changing for LGBTQ+ women. 24% of respondents reported their gender as "fluid or changing" and 32% described their sexuality as "fluid or changing." "LGBTQ+ women's identities across the board are very expansive," says Grant.

This fluidity "reflects how things are changing in our society in terms of understanding nuances in gender and sexuality," says Amanda Pollitt, an assistant professor at the Center for Health Equity Research at Northern Arizona University. "I wasn't really expecting to see quite so much diversity and especially gender identities."

One of the last questions of the survey asked: "What are your favorite things about being an LGBTQ+ woman?"

Of the 21,000 answers from 7,000 respondents, Grant says what people love is self-determination, community and the freedom to choose who they want to be with. For Perez-Darby, the survey underscores "the resiliency of queer and trans communities, how we have held each other, and all the different ways we figure out how to be in relationship with each other to survive and thrive."