miner speed 10s/60s/15m 12534.0 12390.0 12427.7 H/s max 13773.9 H/s
OKAY! I decided to completely wipe the Gupax from my system. Restarted. Downloaded 1.3.1 again. With a fresh clean slate, I edited the config.json with my settings, and voila:
Now onto the next issue that reared its ugly head: the Status tab in Gupax isn't working right. Here's what I mean:
Ok. Suppose I delete the original config.json file. Then I close out Gupax. Would it recreate a fresh config.json at that point? Then I can make my edits (1gb-pages true, etc) ? Sorry for all the n00b questions, and you've been my hero thus far!
Would it be too much to ask for you to share your config.json (without your wallet address, ofc) ? Feels like I need to wipe everything from my config.json and start with known working code.
I just made a backup of the config.json to config.json.old so I can safely delete the "corrupted" config.json . I'd truly appreciate it, if you shared yours _
Even more confusing is my Linux OS truly thinks 1GB Pages are running.
If I run in a Terminal sudo cat /proc/cpuinfo | egrep -o pdpe1gb | head -n 1
result is: pdpe1gb
But the only Command Argument declared is --config config.json
And if I delete the Command Arguments:
XMRig starts, no error.
Thanks for chiming in! And I'm all about patience _ "Hurry up and wait" is my motto. Love this community!
Ah. Just ran it, XMRig throws an error.
--config config.json
Okay, made your edits. Restarted Gupax. Waited for P2Pool to sync (go green). Then I kicked on XMRig with command argument: –config config.json Here's the error I get:
HEY TUSKER! So good of you to chime in! Love your help.
So, curious, are you also running Huge Pages, and if so, did you leave the config.json set to a value of "true", or did you specify an actual value?
Here's the relevant portion of my config.json for Huge Pages:
"cpu": { "enabled": true, "huge-pages": 32768,
I'll make your changes then restart Gupax. Thanks so much!
1GB Pages ENABLED in Gupax!!!! But now... the Status Page is fubar.
Hello my fellow deviants. It is I, Dark_Armadill0. I made the switch to Gupax, and although I love it (and am finally seeing payouts), I’m a little underwhelmed with a few things. Ahem:
Formerly I ran XMRig standalone and experienced the following:
- With plain XMRig I was netting 18,000 H/s.
- With plain XMRig, I had 1GB Pages Enabled.
- With plain XMRig, I had Huge Pages 100% enabled.
Now under Gupax, I have the following:
- Hashrate has dropped to 13000 H/s (can run [h] command on XMRig tab to get this value)
- 1GB Pages are NOW ENABLED.
- Huge Pages are at 100% enabled.
- STATUS Page of Gupax is not correctly showing/pullling information.
So I pasted it (with and without your quotes) and the XMRig failed to initialize for both attempts. This was in the "Command Arguments" input field of the XMRig tab under Gupax. It looks like it allows adding arguments, but this suggestion didn't work for me sighs Thanks for your suggestion, keep 'em coming _
Gupax - Enabling 1GB Pages ain't working
Hello fellow deviant, it is I, Dark_Armadill0.
I'm not so new to XMRig, but I am new to Gupax.io and I'm lost on how I can get 1GB Pages from Disabled to Enabled in the XMRig portion of Gupax. Yes, my CPU supports it. Yes, I made my Linux OS use HugePages. Yes, my RAM and OS CLI checks reflect their usage. Yes, I've also used this script . It all works, except in Gupax.
So, how do I get Gupax to use it? In standalone XMRig, I would just have to run the program as a superuser, and it was done.
Thanks in advance!
Thanks so much MoneroBull! So good to see you! I have enormous respect and admiration for ya, you're a great person, and such a jewel in the community! I'm trying to find an EPUB or something to learn the in's and out's of mining Monero. I'm also walking through SerHack's "Mastering Monero"... do you know if mining broken down in it? I'm only on Chapter 1 at present.
Oh my Gucci- I just got a payout with the Monero GUI local node + miner, using P2Pool Mini! This is the first fruit of my labor! Seizure for Jesus, I finally did it!
I'll have to reattempt gupax. I fumbled my way around it, couldn't get it to work right. I'll have to dedicate an evening, relax and take a systemic approach to get it squared away. I'm sure I messed something up that's trivial, but I got disheartened and just went back to XMRig. Gotta try harder next time. Good suggestion, from what I read, Gupax is stupid easy to get going. I don't know where I went wrong.
^This was my sentiment regarding Gupax . I'm sure if I just slowly go at it I can overcome my lackluster mining experience and make it work.
I'm happy to support the network, I know I'm playing the long-game when it comes to ROI. I splurged on this machine to retire a 2011 build, and although I mainly use it for general computing, I'm mining 24/7 and this bad boy just won't slow down. I'm ecstatic.
Low Hashrate on AMD 5950X + No rewards from mining for 2 months non-stop.
![](https://monero.town/pictrs/image/32ca136c-3267-4408-864f-7509a81ad078.webp?format=webp&thumbnail=128)
![](https://monero.town/pictrs/image/32ca136c-3267-4408-864f-7509a81ad078.webp?format=webp)
Why, hello, fellow deviant. It is I, Dark_Armadill0. I've done two major recent changes, and now find myself troubleshooting/opinionating my situation. Buckle up, Spanky, it's a long read, but I want to give helpful details to get helpful answers back from you.
- I upgraded Ol' Bessie from an AMD Phenom X6 (hex-core) AMD 1055T and built a new system.
CPU: AMD Ryzen 9 5950X processor at 3.7GHz (no manually over/underclocking done)
RAM: G.Skill 32GB CL14 running at 3600Mhz natively
Mobo: MSI MPG X570S Edge Max Wifi
Drive: Samsung 980 Pro with Heatsink NVME M.2 SSD
Ol' Bessie was mining at 534 h/s on a good day on the 2011 PC build. Henceforth, my computer's name will be referred to as Mone Risa. Mone Risa was mining at 18534 h/s before I tried my hand at overclocking and had to reset the CMOS to clear the BIOS and default the system. So, last week I restarted Mone Risa and my hashrate, for some inexplicable reason, dropped to 16337 h/s (pictured). I'm wondering if the hashrate will bounce back, or if something on the network (say, difficulty) changed and my new 16337 h/s cannot be improved?
- I've been mining on Mone Risa using XMRig 6.xx with 1GB Hugepages successfully enabled on my Linux OS... and from what I can tell from XMRig's startup preamble, the hugepages are running in XMRig as well. I am mining on xmrpool.eu:9999 pool, which is super close to me as I'm in the same country as that server. I've been mining for about 2 months now, and have 0.00000000000 XMR to show for it. Since I'm mining with a pool that has a payout at 0.07 XMR I'm kinda disheartened to see absolutely nothing. Haven't received any shares of block rewards. Is this normal?
Thanks in advance, and thank you for using Lemmy! I'll see ya in the trenches.