Essential chemicals for modern solarpunk civilization
Ammonia (NH3)
Very popular scrubbing solvent to remove pollutants from fossil fuel combustion
streams before they can be released to the atmosphere.
Also a popular refrigerant and precursor to nitric acid. (Key to making artificial fertilizers)
Calcium Oxide (CaO) [quicklime or burnt lime]
As a cheap and widely available alkali.
About 50% of the total quicklime production is converted to calcium hydroxide
before use.
Both quick- and hydrated lime are used in the treatment of drinking water.
It can be created by heating the limestone to 900°C for several hours which would
turn the limestone into quick lime
Calcium hydroxide [hydrated lime, caustic lime, builders' lime, slack lime, cal or pickling lime]
Calcium hydroxide is commonly used to prepare lime mortar.
One significant application of calcium hydroxide is as a flocculant, in water
and sewage treatment.
It forms a fluffy charged solid that aids in the removal of smaller particles
from water, resulting in a clearer product.
This application is enabled by the low cost and low toxicity of calcium hydroxide.
It is also used in fresh-water treatment for raising the pH of the water so that
pipes will not corrode where the base water is acidic, because it is self-regulating
and does not raise the pH too much.
It can be created by combining quicklime with water to form slaked lime
Ethylene (C2H4)
Probably the most popular industrial precursor to polymer manufacturing
Hydrochloric Acid (HCl)
Used mainly in the production of other chemicals (by acting as a reactant or a
catalyst)
Methanol (CH3OH)
Used as a reactant to make methyl tertbutyl ether (MTBE), formaldeyde, and acetic
acid.
Nitric Acid (HNO3)
Most common application is its reaction with ammonia to form the solid fertilizer
ammonium nitrate the most widely used solid fertilizer.
Nitric acid is subject to thermal or light decomposition and for this reason it
was often stored in brown glass bottles
Nitric acid's boiling point of 83 °C. (68% solution boils at 121 °C).
Dilute nitric acid may be concentrated by distillation up to 68% acid, which is
a maximum boiling azeotrope. In the laboratory, further concentration involves
distillation with either sulfuric acid or magnesium nitrate, which serve as
dehydrating agents. Such distillations must be done with all-glass apparatus at
reduced pressure, to prevent decomposition of the acid. Industrially, highly
concentrated nitric acid is produced by dissolving additional nitrogen dioxide
in 68% nitric acid in an absorption tower.
The dissolved NOx is readily removed using reduced pressure at room temperature
(10-30 minutes at 200 mmHg or 27 kPa) to give white fuming nitric acid.
Propylene (C3H6)
Another industrial polymer precursor
Sodium Carbonate (Na2CO3) [washing soda, soda ash and soda crystals]
Used in many cleaning agents and in glass making.
Sodium oxide is a component of most glass, although it is added in the form of
"soda" (sodium carbonate).
Typically, manufactured glass contains around 15% sodium oxide, 70% silica (silicon
dioxide) and 9% lime (calcium oxide).
The sodium carbonate "soda" serves as a flux to lower the temperature at which
the silica mixture melts.
Soda glass has a much lower melting temperature than pure silica, and has slightly
higher elasticity.
Sodium hypochlorite (NaClO) [liquid bleach]
A method of producing sodium hypochlorite involving the electrolysis of brine to
produce sodium hydroxide and chlorine gas, which then mixed to form sodium
hypochlorite.
Today, an improved version of this method, known as the Hooker process (named
after Hooker Chemicals, acquired by Occidental Petroleum), is the only large-scale
industrial method of sodium hypochlorite production. In the process, sodium
hypochlorite (NaClO) and sodium chloride (NaCl) are formed when chlorine is passed
into cold dilute sodium hydroxide solution. The chlorine is prepared industrially
by electrolysis with minimal separation between the anode and the cathode. The
solution must be kept below 40 °C (by cooling coils) to prevent the undesired
formation of sodium chlorate.
Sodium hypochlorite can be easily produced for research purposes by reacting ozone
with salt.
NaCl + O3 → NaClO + O2
This reaction happens at room temperature and can be helpful for oxidizing alcohols.
Sodium Hydroxide (NaOH) [lye and caustic soda]
The most popular alkaline substance in industry.
Widely used in dyes and soap manufacturing.
Also a good cleaning agent and can be used to neutralize acids.
Sulfuric Acid (H2SO4)
Probably the most common industrial acid. Used widely in mineral leaching and gas
scrubbing (removing dangerous substances).
Also used to neutralize alkaline substances and as an electrolyte in lead-acid
batteries.
A nation's sulfuric acid production is a good indicator of its industrial strength.
Sulfuric acid can be obtained by dissolving sulfur trioxide in water.
potassium carbonate (K2CO3) [Potash]
Used in agriculture as a crop fertilizer.
Urea (CO(NH2)2) [carbamide]
More than 90% of world industrial production of urea is destined for use as a
nitrogen-release fertilizer.Urea has the highest nitrogen content of all solid
nitrogenous fertilizers in common use. Therefore, it has a low transportation
cost per unit of nitrogen nutrient.
An essential ingredient in diesel exhaust fluid (DEF), which is 32.5% urea and
67.5% de-ionized water. DEF is sprayed into the exhaust stream of diesel vehicles
to break down dangerous NOx emissions into harmless nitrogen and water.
The most common impurity of synthetic urea is biuret (HN(CONH2)2), which impairs
plant growth.
Lithium peroxide
It is prepared by the reaction of hydrogen peroxide and lithium hydroxide.
This reaction initially produces lithium hydroperoxide:
LiOH + H2O2 → LiOOH + 2 H2O
This lithium hydroperoxide has also been described as lithium peroxide
monoperoxohydrate trihydrate (Li2O2·H2O2·3H2O). Dehydration of this material
gives the anhydrous peroxide salt:
2 LiOOH → Li2O2 + H2O2 + 2 H2O
Li2O2 decomposes at about 450 °C to give lithium oxide:
2 Li2O2 → 2 Li2O + O2
It is used in air purifiers where weight is important, e.g., spacecraft to absorb
carbon dioxide and release oxygen in the reaction.
I'd add hypochlorous acid. Easy and cheap to make with everyday stuff, great sanitizer, deodorizer, and household cleaner. I've been using it for about 3 years now for everything from cleaning pet bowls to cleaning my face, to mopping my floor, to cleaning counters and sinks. I call it magic water at home.
Why are you suggesting the use of N fertilizers, when solar punk, by my understanding, wants the most ecological sound means of all aspects of society, including crop production.
Personally, I'm fine with chem fertilizers, but they need to be used way more carefully than they are.
Oh, I was not trying to suggest anything further than: Here is what these are currently used for as informational basis of understanding some basic chemicals that may be all around them.
This is so cool, thank you for making this! I've always struggled with chemistry but your explanations of the practical uses of these chemicals make it a lot easier to understand.