Honey, I think I broke the Jolt
Honey, I think I broke the Jolt
I was hoping for a better inaugural Discuss post, but...
So, I got a Rebelle Jolt clone for Kiddo 02 because 01 liked theirs so much. So I thought I'd do the usual stuff like drilling out the air restrictor.
Except this time around, performance has gone way down. Barely flops out of the barrel. I thought I'd try replacing it with some brass (17/32 I think? I should really write this down), but it's even worse now. I'm thinking of drilling out enough space for a Crayola barrel, but I'm kind of afraid I'm just butchering it at this point.
Please advise, and thanks in advance.
Is there any debris in the plunger tube from the drilling? Also sufficient lube, and a decent air seal?
I don't think there's any debris. A little bit of air restrictor I can't quite get out, but it's shoved out of the way just by putting a dart in. I added some silicone grease for good measure, so it's all lubed up. And the sealing ring is stock, which worked fine before.