Impressed by the Longshot
Impressed by the Longshot
I figured I'd post a blaster pic...
Anyway, I'm really struck by how good this Longshot is for the price. Handling makes the thing fun to use despite only averaging about 135fps.
I did the barrel swap mainly so that I could add the BCAR. I don't see the internals holding up to a stronger spring without swapping them for metal. Once you've done that then you've got the shell to worry about. The blaster feels surprisingly solid but the shell is really thin.
Which barrel are you using? And I assume that's a Jingjia CNC bcar?
The BCAR barrel is from MEGO. It's only got a 5 degree twist so not as effective above 200fps.
The barrel is from Black Raisins. I'm pretty sure that I'm getting a better seal than stock because the OD is a tiny bit larger. However, it has a textured finish which is probably not ideal given that the plunger wraps around it.
I get 160FPS out of mine out of the box with the short darts it came with.
I used Worker darts in mine. Performance is pretty inconsistent. I got shots as high as 169fps and as low as 114fps.
I just picked mine up the other day, kinda excited to start messing with it. Did you open yours completely or just take off the front end?
I opened it completely. I had to dremel the front end to fit the barrel. There are a lot of screws and a few fiddly bits but it's not bad at all to get apart.
I also tried removing the ratchet arm. It works, but I noticed that with it missing the trigger pulls the front prime back just enough that the blaster won't fire. Not a big deal if you push on the front grip, but still a nuisance.
Which mag adapter is that? Is it just a spring detent so you can pull it out without holding a lever?