On her maiden voyage!
On her maiden voyage!
Finished everything up assembly-wise. Still lots of tuning to do, but I'd say this first print looks phenomenal for not having done any tuning other than Klicky+calibrate_z
What kind of printer is this, and where do I get one? Looks like a massive bed!
It's a Voron 2.4r2! Bed size is 350mm square. I built it from the LDO motors kit. You can find them lots of places. Here's a link to LDO resellers (https://docs.ldomotors.com/voron/LDO_Voron_Distributors). There are other kit options, too, including West3D and Fysetc.
Awesome, thanks for the response and links! My girlfriend is about to hate me haha.
Very nice, congrats on the progress!
I was pleasantly surprised to see how well mine printed with minimal tuning. I have a full set of magnetic panel clips printed now, so I'll have to see if I can get an "finished" picture posted tonight. There's still more to do (under bed filter/chamber heater, I want to reprint the panel clips and front door latches with somewhat different dimensions, I need to modify the spool Holder, and I need to do something for the rear panel vent), but... hopefully I can try a bigger print that's something other than printer parts soon.
Thanks!
Yup, still much to do on mine too. Bed clips, skirts, fans, led mounts, camera mounts... It's fun to tinker some, but I'll be glad when it's all calibrated and ready to print reliably. I've got some issues here and there with endstops I need to figure out.
Ha, totally agree. I suspect I'm going to quickly get to the point of "good enough" once the filter/chamber heater is in and I get the spool holder updated. I've had two prints fail mid print with zero extrusion. Manually pushing filament through the PTFE tube got it fixed. I'm betting the 3kg spool not rolling smoothly was the cause.
What's going on with your endstops? I had mine miswired initially, but they never worked in that state.