Corne Choc Per Key LEDs

Hey all, building a corne chocolate with Kailh switches. I ordered SK6812Mini-E RGBs. The issue is that to bottom mount the LEDs it looks as though the ground tab (shorter tapered with notch) is in the wrong corner. It would work if I were mounting them on top, but there is no room for the LED. I'm assuming that I need new LEDs to mount from the bottom.

The PCB is Chocolate v2.1. I am looking to see if anyone can verify that the solder tab on the pcb with the little white box around it needs to match the tapered tab on the LED or the ground pin.