Plate difference
Plate difference
Recently I started printing on Bambulab (previously on Průša Mini). If anyone is curious about how much difference is it
You're viewing a single thread.
What are the dimensions of each plate?
180x180 Vs 254x254 iirc
And then there’s my 5 years old Hypercube Evolution at 300x300 mm (or 1ft x 1ft)
I got a CR10 Max. 450x450mm
And on the other end there’s my MP Select Mini 120x102mm
Nice. I had one of those back in the day, but gave it to a friend.
I've got one now with a V6 knockoff hot end, steel PEI print bed, and running klipper firmware. It was backup printer, and now it's the backup to the backup (purchased Comgrow $70 used Ender 3 pro).
I'd like to give this to a friend that's interested in printing, but I'd have to flash back to stock firmware. The buttons and display don't work with klipper, and I don't have a spare raspberry pi.
It's still relevant with the upgrades I made to it, except it's still has really noisy steppers, and the build volume is so small it's really limiting. I think the Prusa mini is still large enough to be practical. The monoprice is mostly relegated to toys.
I need some 18650 holders for a project which the mini can do great with, but I need a lot and printing them two or three at a time won't cut it.
I left mine in our family vacation house to print spare parts in the summer.
Nice. Personally, I don't think that I could find use for that size. I wanted little bigger than 220x220mm because projects
I got a 300x300mm Sidewinder X2. It's just big enough to fit my noggin and therefore print a helmet capable of fitting my noggin.
Yeah that is a tough size if it's all you have. When I fist got mine I had just the mini and a CR10s 400 which is 400x400mm so anything I could get away with on the little guy I did and kept the big projects on the monster.