The primary motivation behind v2 was to simplify the build process by ditching the XIAO/Shift Register for an integrated STM32 microprocessor. The only parts that need soldered are the hot swap sockets.

Features

• 36 key unibody split
• Choc spaced, column staggered, splayed
• Cirque touchpad support
• Integrated microprocessor
• Built in mounting standoffs
• Preflashed with VIAL

Kits include all required hardware except switches, keycaps and case.

Base Kit - $50

Cirque Kit - $65

Printed Cases are available in every color - as long as the color is purple or black.

Black ABS - $35

Purple ABS - $35

Purple Sparkle PLA - $25

Matte Black PLA - $25

This one pushed the limits. It's a little over-the-top for a wireless build but it's alive and thocking.

This is a 4x6 whole matrix Dactyl Manuform. The case is printed in translucent smoke resin with an acrylic coating.

It's fully wireless running some of the latest ZMK features. Here's the list:

• Trackball support with a PMW3610 sensor utilizing inorichi's new driver and the in-development pointing device setup (it's imminent). It has precision and drag scroll modes enabled on Raise and Lower layers.
• Two Nice!View screens running their standard ZMK widgets -- battery status, connection status, WPM graph, device connection, and current layer.
• Both standard EC11 and wheel-style EVQWGD001 rotary encoders. Volume up/down, page scrolling, and RGB controls on Raise.
• Full hardware per-key RGB running ZMK's Underglow configuration. (ZMK doesn't yet support true per-key RGB.)
• Four layers with support for the Nick Coutsos' ZMK keymap layer editor

It's all running on a pair of PillBug nRF52840 controllers from MechWild and powered by a couple of thick 18650 LiPo batteries. I used Skree Claw flexible PCBs from TheBigSkree for the right and left key matrices which worked out really nicely using his Translator breakout.

Oh, and those are Kailh Purple Pro switches, if you were curious.

It's a lot. It's pushing and/or exceeding the limits feature-wise, power-wise, pin-wise, and memory-wise. But it's alive. The right side PillBug is very nearly maxed out. There were foibles along the way and one or two (or ten) bang-head-on-desk moments, but it all came off in the end.

So.

We're having a light snack of a sale this weekend to celebrate the success of this build. Get 5% off any order with code WYLD_LIGHT_SNACK. Ends midnight, March 31st.

Full Dactyl Manuform Builds (wired and wireless) https://wylderbuilds.com/shop/p/dactyl-manuform-build

DIY Dactyl Manuform Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit

Resin Dactyl Manuform Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

PLA Dactyl Manuform Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases

If you'd like to try a Dactyl Manuform case on for size, we sell "sizing prints" of our C stock keyboard cases so you can actually try a case in hand to gauge how it feels.

https://wylderbuilds.com/shop/p/hand-size-print

Cheers!

Andy @ Wylderbuilds

Over the last couple months I've been working on the next version of Bad Wings, the board I've been daily driving for over a year now. Using the stm32f072 onboard and has cirque support (which wasn't working until a couple hours ago - thanks GeorgeN!). I've been using it for two weeks now and I'm happy.

Now that the cirque is working, I need to design a new case.

Just, you know, hanging and drinking cider at the arcade bar with the latest Wylderbuilds keyboard.

Another jumbo build, a full row 6x7 Dactyl Manuform with dual trackballs. It's got 88 keys total, like a grand piano, so if you're layer-averse, this one's for you.

It's got a gorgeous dark navy gray resin case with a matte acrylic finish and shiny black trackballs. If you squint a little, it might tingle your spidey-sense. It's a beautiful build and a real joy to type on.

And it's that time of year when we celebrate all things Ireland! Which is nice!

But, I have to ask, what about poor Iceland? Doesn't Iceland deserve some love, too?

Bjordagur, Beer Day, was on March 1st, but let's go with that! From now until midnight of March 18, the day after St. Patrick's Day, we're celebrating beer in general with 15% off all orders over $100 at Wylderbuilds! Just use code BEER_BEER_BEER at checkout!

Full Dactyl Manuform Builds (wired and wireless) https://wylderbuilds.com/shop/p/dactyl-manuform-build

DIY Dactyl Manuform Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit

Resin Dactyl Manuform Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

PLA Dactyl Manuform Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases

If you'd like to try a Dactyl Manuform case on for size, we sell "sizing prints" of our C stock keyboard cases so you can actually try a case in hand to gauge how it feels.

https://wylderbuilds.com/shop/p/hand-size-print

Skál!

Andy @ Wylderbuilds

Is it Godzilla?? An active volcano?? A runaway nuclear reactor??

Well, no, clearly not.

But it IS a brooding 6x7 Dactyl Manuform keyboard build with a dark navy gray resin case and RGB underglow LEDs. Add a purple trackball, dual OLEDs, and dual rotary encoders, and you've got an (ergonomic!) weapon of ginormous productive power.

It's running QMK firmware with all the whistles and bells. Full Vial support so you can easily tinker with your keymaps, monkey around with macros, and choreograph your tap-dances.

We also offer fully wireless builds running ZMK firmware with all of its whistles and bells! Just be prepared to carry around a car battery if you want ALL the features.

There's only a week left to our WINTER DOLDRUMS sale! Get 10% off any order of $100 or more with discount code DOLDRUMS_2024! Sale ends at midnight, February 29th.

Full Dactyl Manuform Builds (wired and wireless) https://wylderbuilds.com/shop/p/dactyl-manuform-build

DIY Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit

Resin Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

PLA Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases

If you'd like to try a Dactyl Manuform case on for size, we sell "sizing prints" of our C stock keyboard cases so you can actually try a case in hand to gauge how it feels.

https://wylderbuilds.com/shop/p/hand-size-print

Cheers!

Andy @ Wylderbuilds

Hello, all. Lots of stuff going on here.

These pictures aren't full builds, obviously. Rather, they're trial prints of some standard dactyl manuform models I plan to offer. They'll be available as kits and for full builds at a solidly lower price point than our fully custom builds. I want to make manuforms with a nice selection of bells and whistles more generally affordable.

So, I'd like to gauge the thoughts of folks on here and see what features as standard make the most sense.

That's a 6x7 in the main image, but I'm also planning a 3x6:

!A 3x6

And a 5x6:

!And a 5x6

My current plan is that they include by default:

A. One trackball with regular pointer and dragscroll modes. Can choose left side or right side.

B. One rotary encoder above the trackball set as volume control and mute on base layer and page up/page down on other layers.

C. One OLED screen on the non-trackball side displaying current keymap layer, active mod keys, mouse mode, and words-per-minute.

D. Pi Pico or other rp2040 controllers.

E. USB-C cabling all around.

F. QMK firmware with Vial support for editing the keymaps, layers, and other features on the fly.

As a base set of features, how do those sound to folks?

Outstanding bits I'm still debating:

A. Are there other sizes missing here that you'd all rather see? 3x5? 4x6? 6x6?

B. Hot swap support always or hand-wired switches? If hard-wired, what selection of switches and keycaps would you like to see? I know that's an insane question as the options are endless. The point here is lower cost, though, not high end. I want to offer whole-package builds, ready to plug in and start typing, and forgoing hot swap would save on overall cost and build time.

C. Wireless? ZMK firmware is coming on strong and I'm doing quite a few wireless builds these days. It would add to price considerably, though.

D. Any other features? Other firmwares? Other controllers or hardware?

Would love to hear any and all thoughts.

And, of course, here's the plug for the store:

There's still slots to get a full build at 10% off! Just use discount code WYLD_BUNCH at checkout.

https://wylderbuilds.com/shop/p/dactyl-manuform-build

Also, I have DOZENS of old stock prints. Test prints. Prints with the wrong features or sizing. And, of course, prints with slight failures or cosmetic issues. Since dactyl manuforms are such a departure for most people, I'm offering these halves at five bucks a pop (plus shipping) so anyone curious can actually throw switches on and get their hands on one to see how it feels. It'll be a random side and size, just specify if you want left or right ($5 each) or both ($9). If you get both, just know they're unlikely to match if we don't have a matching pair.

Hand Sizing Prints https://wylderbuilds.com/shop/p/hand-size-print

Cheers, thanks for another great year, and keep typing like a God!

Andy @ Wylderbuilds

Instead of the shiny end-result I usually post for Wylderbuilds, I thought I'd post a build near the finish line. It's a dual trackball 3x6 Dactyl Manuform. The case is printed in black PETG and I'm using custom breakouts for Pi Pico controllers along with flexible PCBs on the columns (from The Big Skree,https://skree.us)

The trackball sensors are PMW3360s. I have a guide for setting them up with QMK here:

https://wylderbuilds.com/trackball-install

Also, of course, gotta plug that there's just TWO DAYS LEFT on our winter sale! Use discount code WYLDTIMEOFYEAR at checkout to get 25% off any order at wylderbuilds.com!

Gift Cards https://wylderbuilds.com/shop/p/gift-cards

Full Dactyl Manuform Builds https://wylderbuilds.com/shop/p/dactyl-manuform-build https://www.etsy.com/listing/1392490530/dactyl-manuform-keyboard-builds

PLA Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases https://www.etsy.com/listing/1196813412/custom-dactyl-manuform-cases

Resin Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print https://www.etsy.com/listing/1028152282/dactyl-manuform-resin-print-with

DIY Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit https://www.etsy.com/listing/1497924757/dactyl-manuform-build-kit

Happy Thocking Holidays!

Andy @ Wylderbuilds

**OUR WINTER SALE GOING STRONG! **

Get 25% off any order with discount code: WYLDTIMEOFYEAR. Valid from now until midnight, December 24th.

**PLUS, we now offer gift cards! **Can't afford a Wylderbuilds keyboard yourself? Now you can get someone else to pay for it!!

https://wylderbuilds.com/shop/p/gift-cards

Full Builds https://wylderbuilds.com/shop/p/dactyl-manuform-build

PLA Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases

Resin Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

DIY Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit

Cheers, and stay warm!

Andy @ Wylderbuilds

Today's Flash Sale: Last Chance for 30% off keyboard kits

https://www.diykeyboards.com/

You can still take advantage of 25% off everything in our store, plus a different Flash Sale every day. Enjoy, and thanks for your support!

Also, rather than spam the group with promos, I will be updating here with the daily Flash Sales, so be sure to check back.

Figured I should do a Black Friday sale also. No coupon needed, sale ends December 1st.

$10 off Bad Wings Kits

$5 off Cut Slope Kits

$5 off Cut Slope PCBs

Nope, you're not seeing double. It's two identical Polydactyl builds (the Polydactyl is a big, flatter Dactyl Manuform variant.)

These two massive monsters feature:

• 87 keys total.
• White resin cases.
• Dual trackballs (scroller on left, pointer on right.)
• Dual OLEDs.
• Rotary mouse-wheel style encoder.
• NEW! Per-key RGB backlighting.
• All running QMK on Pi Pico controllers with Vial support.

They're massive! But we build all shapes and sizes with as many or as few fancy features as you'd like!

And it's that time of year!

This is our biggest sale yet, get 20% off any order of $100 or more with code WYLD_FRIDAY at wylderbuilds.com!

Full Builds https://wylderbuilds.com/shop/p/dactyl-manuform-build

PLA Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases ** Resin Case Prints** https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

DIY Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit

Cheers and keep typing like an RGB-backlit God!

Andy @ Wylderbuilds

Foam for Corne Cherry Split Keyboard

This time it's a minimal build, a 3x6 Dactyl Manuform with dual encoders on the right pinky column.

This build is printed in a shimmer black PLA that always comes out remarkably well. The silver trackball on the right does the pointing thing and the gold on the left navigates content via drag scroll. It's a terrific little Miryoku-ready keyboard with the latest QMK firmware and full Vial support.

Sizes range from 3x5 to 6x7 with cases printed in resin or PLA. All builds are fully hot-swappable, run on QMK, KMK, or ZMK, and now use USB-C for all connections (except wireless models.)

Other options include:

• Bluetooth Wirless support.
• Trackballs (one or two).
• OLED screens.
• Rotary encoders (wheel encoders now supported!)
• RGB Underglow
• A selection of Kailh switches.

Pick up a build today!

https://wylderbuilds.com/shop/p/dactyl-manuform-build

We're having a WHATEVER SALE! Like most of you out there, it's that special time of year to celebrate... Whatever. I dunno. We're having a sale. Swing on by.

From now to October 15th, get 10% off any order of $100 or more at Wylderbuilds with checkout code YEAH_WHATEVER_MAN.

Speaking of Miryoku... These are coming along fabulously.

!

Soon now.

Cheers, and keep typing like a God!

Andy @ Wylderbuilds

We've got some new fun colors for our resin case prints and builds at Wylderbuilds.

A deep and mysterious translucent red:

!

and a bright and happy mint green!

!

They print beautifully, as you can see.

You can now find examples of all our available resin colors here: https://wylderbuilds.com/colors-resin

Our Back-To-School sale is still happening, folks! From now until the end of August, you can get 10% off all orders over $50 with code ERGONOMICS-101 at checkout!

Come pick snag an itsy 3x5 Manuform or go whole hog with one of our massive 6x7 Polydactyl Rex models!

Full Builds https://wylderbuilds.com/shop/p/dactyl-manuform-build

Resin Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

Cheers!

Andy @ Wylderbuilds

I've posted a couple times about Cut Slope, but one last post to announce that I've released the source code today.

I've got a couple of the prototypes left if you're interested in getting one without getting a whole order fabbed.

Another happy Svalboard user is crushing it on day 1! I'm really amazed at how quickly most folks are adapting, users of split ergo boards seem to be getting the hang in a week or so, and transitioning to full-time use after 2-3 weeks!

Took me way longer twenty years ago on Datahand, but I had atrocious touch-typing form ;P

Context: Svalboard is my evolution of Datahand and lalboard into a production device. I build them myself here in Pacifica, CA.

It surrounds the fingers with magnetically actuated keys in 5 directions, with total anatomical customizability through novel fitment mechanisms that can suit any hand size and finger anatomy.

20g force is standard, and the profile is insanely tactile/clicky, with instant actuation and very fast breakaway of forces (1/x^2).

It runs QMK-Vial, and is totally modular. Replacement parts can be printed on a Prusa MK3S or equivalent.

Lots more detail at https://www.svalboard.com

Come join the Discord, it's pretty lively and I post lots of the day-to-day design and fabrication experiments as I evolve things! :D

https://discord.gg/DnGcHM4Rg8 !

Hey! Marshall here from Skree LLC. I'm so very lazy at posting advertisements and community updates but I figured I should get off my butt and do something.

So I've been at this for about a year. The rave reviews and many customers turned friends I've made leads me to assume my work is at least of pretty good quality! I make only wireless builds unless you want something specifically custom.

My dactyls can be ordered with whatever switches you want, they're all hotswap too! I produce custom keycaps to your specifications, including font, format, size, position, etc!

I've got lots of new stuff on the horizon! Choc dactyls, choc flexible pcbs, custom MCU-breakout boards that allow for near ZERO soldering thanks to the use of FPC and JST cables! Just assembled a pick and place machine for all custom pcb manufacturing!

You can check out my reviews, customer photos, and work at SKREE.us or etsy.com/shop/TheBigSkree

If you want any custom work at all let me know! I'm always looking for fun projects!

PS: If you want kinesis board work, be it foam, switchs changed, or even repairs I'm far quicker and have no "lead time" like the current other options!

!

!

!

!

!

!

!

Yeah, it's a lot, isn't it?

This is the most feature-rich build I've done yet at Wylderbuilds.

It's a... (big breath in)... Full 6x7 Dactyl Manuform printed in translucent blue PLA with full hot-swap support, dual trackballs, dual OLED screens, dual rotary encoders, underglow RGB, running QMK... wheeze... with Vial support... gasp... on Pi Pico controllers!

It's not for jotting down grocery lists.

Well, unless it's the grocery list of the gods.

In other news, our back-to-school sale is still on. Get 10% off all orders of $50 or more with code ERGONOMICS-101. Sale ends on August 31st, so act... Well, that's like over two weeks away, so you've got time.

But feel free to browse!

Full Builds

PLA Case Prints

Resin Case Prints

DIY Build Kit

Cheers!

Andy @ Wylderbuilds

PS. The switches shown are my test switches used during builds. They're not included in the build as it's fully hot swap capable, so customers can use any switches they like. The switches on the left are Kailh Speed Copper and on the right they're Kailh Purple Pros. I didn't have enough of either for the whole, vast keyboard.

Of course, we're having a back-to-school sale! I mean, who isn't?

Get 10% off any order over $50 with checkout code ERGONOMICS-101.

Looking foward to going back to school? Yes? No?

Well, regardless, when writing those searingly insightful love sonnets to mitochondria, or another paper noting the potential link between neutrinos and hiccups, or your groundshaking thesis on the global seismic white noise caused by earthworms, please, PLEASE don't cramp up your fingers on those fugly membrane laptop keyboards.

Let your elucidations flow freely onto the digital page with a Dactyl Manuform ergonomic keyboard!

From minimalistic 3x5 kits to monstrous 6x7 beasts with ALL THE KEYS, we've got you covered.

Options abound: Single and dual trackballs, OLED screens, rotary encoders, underglow RGB, and now BLUETOOTH wireless.

We offer full builds as well as PLA or resin case prints and whole kit parts for a full do-it-yourself build.

Full Builds https://wylderbuilds.com/shop/p/dactyl-manuform-build

PLA Case Prints https://wylderbuilds.com/shop/p/made-to-order-dactyl-manuform-cases

Resin Case Prints https://wylderbuilds.com/shop/p/dactyl-manuform-resin-print

DIY Build Kit https://wylderbuilds.com/shop/p/manuform-diy-kit

Type like a GOD.

Cheers!

Andy @ Wylderbuilds