Librel Snowflake: 3D Printed AR22 with homemade binary trigger

cross-posted from: https://lemmy.world/post/9323891

Here is the other side: https://imgur.com/a/DQQooDk

Gushing about CoreXY:

I finally got around to upgrading to a klipper based core xy machine and it is magic I went for the K1 Max, since it was $680 after discounts and it's 300mm³ (1.5X the size of a X1C)

Accelerations are 10x faster, print times are 4x shorter compared to my highly modded ender3 and cr-10. this build took about 12hr of print time, normally it was 2 full days.

NO sanding, NO filing, NO heating things up to make them fit right.

Every single piece came off the build-plate perfectly ready to go, aside from my intentionally under-sized pivot and takedown pin holes. I like to drill those out personally...

Now for the specifications:

• Daichi Upper + shroud (modified)
• DS1913 Lower v1.2 (modified)
• Slim Everytown mag (modified)
• Get Bent angled grip
• Mini hand stop
• sling mount is just the mount from SG22 brace
• Sling is a laptop bag strap 😆
• The muzzle device is an AKM compensator I modified to work for AR barrels. It works marvelously to prevent muzzle climb. Check the video how the gas is going up and forward.
• The binary is the mythical Invisibinary by Klaviermeister. It was taken down years ago but if you have half a brain you can find it still. Fosscad of reddit keeps making posts begging for the files every few months lol. they all give up and pay $400 for a storebought binary.

Wondering about reliability? I have thousands of rounds through this binary trigger. check out this clip of a mag dump at 600RPM: https://imgur.com/a/khxhymP

this firearm is for self-defense only. The quote is from ___