Ditching MyQ for OpenGarage - Open Source Garage Door Control
Ditching MyQ for OpenGarage - Open Source Garage Door Control
This posts details how I ditched Liftmaster MyQ and switched to a much better, completely selfhosted and local way of controlling my garage door with OpenGarage, and the problems I ran into with both solutions, and how I overcame them. MyQ In my garage I have a Chamberlain Liftmaster Garage
Hopefully this fits here? Its self hosted, but not quite what the usual self hosted post would be. I've not seen any real reviews of these, so I figured I'd post
You're viewing a single thread.
lol, just get a dumb opener and a shelly relay or use a meross unit. Super cheap and flawless local control that is cloud-connected if you want it.
I use a Meross. Works very well with HomeKit.
MyQ was always a piece of garbage for me. Damn thing would error out and become non responsive after 5-10 openings, and would require a reboot. Could never figure out the root issue. Tech support was worthless. My hunch is that it doesn’t play nicely with Unifi equipment, or I’m getting interference from industrial sites nearby.
I have the same issues as you; to make matters worse, it doesn't like any of the Android phones I have so I have to borrow someone's iPhone just to hook the damn thing back up.
Unless you absolutely need MyQ because of a 3rd party integration, I’d really suggest ditching it. The only problem I’ve ever had with the Meross was when my local DNS (AdGuard Home) got flaky — and I can’t really blame that on Meross. Other than that, it’s been rock solid.
I absolutely plan to. It's an unreliable piece of shit.
There is more to it with garage doors, what about the current state of the door, do you only want to open it a little bit for more fresh air and close it afterwards, bonus, is a car in there
One relay doesn't fix this, it is simple but not that simple
We added a tilt sensor to our door that shows the state of the door for the most part. The threshold we have it at doesn't detect if it's partly open, but that's okay for us because we never leave it cracked
I don't know about him, but I really don't want to be screwing around replacing my openers
Most openers have a dumb switch interface. A simple close-to-change circuit - I've never had one that wasn't that way. If MyQ is so complicated (serial interface!?) then it needs to go anyway.
Right, but the opener is already there and installed. Plus, it does give you all the information and control over that interface. Buying a ratgdo for $30 and adding it into your Liftmaster opener is still a better situation than a dumb opener and a dumb switch. The dumb switch doesn't give you open/closed/stopped status, lights, etc.
If I were to buy a new opener, I would probably get a liftmaster + ratgdo again anyway
The cheap-as-dirt meross does, it has an open/closed sensor.
I think the newer liftmasters are wireless. The old push button wires are just power for the wireless remote.
Seconding the meross recommendation. Installed it about a year ago and it's been flawless.