You're viewing a single thread.
All Comments
15 comments
More details:
- The african mahogany has a continuous grain pattern all around the box.
- It was made with simple miter joints and the splines you see on the image.
- The bottom is also made with maple.
- The inner walls are maple that were friction fit.
- Finished with tung oil.
- I had to make 2 jigs for this: a cross cut sled with an edge for the 45 degree cuts and a spline jig.
3 0 ReplySounds great. Could you please show pictures of the jigs?
1 0 ReplyHere’s the spline jig. I don’t have a current pic of the sled. I had to modify it. I’ll get that up later today. (excuse the mess)
1 0 Reply1 0 ReplySorry for the delay
1 0 Reply
15 comments
Scroll to top