What do you mean by hop bursting? Dry hopping? Omega yeast have done studies on dry hop timing and resultant haziness (or lack thereof) in finished beer.
Ok, some of this is in Swedish but you should understand the important stuff
American Pale Ale
Typ: Helmalt
IBU : 40 (Tinseth)
BU:GU : 0.74
Färg : 14 EBC
Kolsyresättning : 2.4 CO2-vol
Densitet innan kok : 1.048
Original Gravity : 1.054
Final Gravity : 1.011
30l Kastrull + lauterhelix
Satsvolym : 20 L
Kokvolym : 28 L
Volym efter kok : 25 L
Mäskvatten : 18.08 L
Lakvatten : 17.49 L
Lakvattentemperat.: 76 °C
Satslakning : 1.05 L + 16.44 L
Koktid : 60 min
Total vattenvolym : 35.57 L
Totalt utbyte: 60%
Mäskutbyte: 72%
Extraktgivare (5.69 kg)
3.986 kg - Pale Malt 6.5 EBC (70%)
1.139 kg - Munich I 15 EBC (20%)
342 g - Carapils/Carafoam 3.9 EBC (6%)
228 g - Melanoidin 59 EBC (4%)
Humle (167.1 g)
30 min - 11.9 g - Columbus (Tomahawk) - 14% (...
15 min - 11.9 g - Centennial - 10% (6 IBU)
15 min - 11.9 g - Columbus (Tomahawk) - 14% (...
5 min - 11.9 g - Centennial - 10% (3 IBU)
5 min - 11.9 g - Citra - 12% (3 IBU)
5 min - 11.9 g - Columbus (Tomahawk) - 14% (4...
1 min - 11.9 g - Centennial - 10% (1 IBU)
1 min - 11.9 g - Citra - 12% (1 IBU)
1 min - 11.9 g - Columbus (Tomahawk) - 14% (1...
Torrhumle (dryhop)
3 dagar - 20 g - Centennial - 10%
3 dagar - 20 g - Citra - 12%
3 dagar - 20 g - Columbus (Tomahawk) - 14%
Övrigt
Mäskning - 2 g - Calcium Chloride (CaCl2)
Mäskning - 5 g - Gypsum (CaSO4)
Mäskning - 2 ml - Lactic Acid 80%
Lakning - 1.72 g - Calcium Chloride (CaCl2)
Lakning - 4.29 g - Gypsum (CaSO4)
15 min - Kok - 0.5 g - Protafloc
15 min - Kok - 1 tsk - Yeast Nutrients
Jäst
2 pkt - Fermentis Safale American US-05
Mäskschema
High fermentability
72.9 °C - Inmäskningstemp
67 °C - 60 min - Temperatur
So looking at the recipe (which I'm happy to say was far easier for me to understand given how little Swedish (read:none) I know), nothing in the grain bill or the yeast selection should affect clarity. Therefore I have to assume it is the "hop bursting" that is the cause of the haziness. It looks like you have 83.3g total (just under 3oz for any Americans reading) in the last 5 minutes of the boil, not to mention another further 60g (~2oz) as a dry hop. My guess is because the hops are added so late into the hot side, a large quantity of the hop oils is making it into the beer (note: this is certainly not a bad thing!), where they are binding to proteins in the wort to form what is known as colloidal haze. This is a fantastic scientific paper which goes extremely in depth into the properties of haze in beer and the causes of them.
My recommendations for you to help minimize the haze would be firstly:
To lower the amount of carapils/carafoam since it seems that dextrin (which are unfermentable) can possibly be a culprit for contributing to haze.
Possibly to do a 10-15 minute protein rest (at around 43°C (119°F)) before bringing the wort up to the saccharification rest (between 61-71°C (142-162°F)) to lower the protein content of the beer somewhat which also should help. (Note: this will likely have a detrimental effect of head retention)
Adding gelatin to the final beer before packaging can be very effective at removing certain types of haze. See here for more info