homeassistant @lemmy.world guttermonk @lemmy.ml 10mo ago

ZigBee RGB Lightbulb w/o 3rd party app

Any recommendations for a ZigBee RGB Lightbulb w/o 3rd party app - at least not a closed source app.

I heard the Phillips Hue works well but I'd like to be able to install and configure the bulbs with Home Assistant (or another open source app at a minimum). Any suggestions?

You're viewing a single thread.

9 comments

Hue bulbs works with home assistant without relying on the hue bridge or app. Just need a zigbee USB adapter.

Ikea also makes some decent bulbs for a fraction of the price.
- Thanks for the suggestions. Do the IKEA bulbs work with HA out of the box or do they need an IKEA app?
  
  I'm using both IKEA and Hue bulbs without having used any of the original apps/hubs (though I do use the deCONZ/Phoscon hub addon, not the Home Assistant ZHA but if you're device is listed as compatible the experience should be the same.
  
  Edit: apparently you can re-pair without a remote, see below comment: ~~One thing to note about the Hue bulbs (without a Hue hub) is that you need one of the remotes to reset bulbs after already being paired so they can be re-paired to a hub,~~ where as the IKEA only need the power turned off and on a number of times to enter pairing mode.
  
  I actually ran into this just the other day on some refurbished Hue bulbs. I was able to reset then without any remote or app using this method. Just make sure to do it 2-3 times in a row or until the bulbs start flashing.
  
  Thanks for the heads up
  
  They just work.
  
  I use bulbs I've bought from IKEA and Lidl. Because they're ZigBee they're local. The "Hub' is HA because I have a ZigaZiga https://electrolama.com/projects/zig-a-zig-ah/ usb stick.
  
  I use ZigBee2MQTT in HA to route commands to my bulbs (and sensors and plugs) which routes ZigBee commands through my MQTT broker which is also in HA.
  
  The only app I use is the Home Assistant app

9 comments