TLDR:

1. Check out the inventory here and send me a PM. The Google Sheet is the Master; it stays updated with what's still available.
2. Provide serial number of item(s), paypal email address, and shipping zip code (I’m 08854, USA).
3. I will reply with the total price. If you accept, I'll send an invoice request through paypal (make sure your paypal mailing address is up to date).
4. Once paid, I will share tracking info when I ship.

***

Check out RepurposedDattos.reddit.com to collaborate on Datto devices!

My main goal is to get these to people who can use them and save them from the landfill. Check out the inventory in the link above and let me know if you're interested. Some of the Datto ALTO 3 V2 units are missing SATA cables and case bottoms. I can't do anything about the cables, but I will 3D Print case bottoms for those without. when I run out I can provide full 3D print cases. Links to the .STLs are listed below for free if you want to DIY.

I have some AC adapters, RAM, and drives so you can have a complete unit shipped to you. Just pick and choose matching components from the Sheets to build it. I get these from other sources so they come and go.

Please check the very bottom of the post for answers before asking a question.

Proof 02/25/2024 ***

Computer Case

• Fractal Design Ridge Computer Case - $125
  • Looks brand new. The thumb screw looks worn, but that's literally the only thing I can find wrong with it.

Motherboard + SOC

• ASRock J5005-ITX - $50

Intel NUCs

• NUC6i7KYK BAREBONES 2x available

  • i7-6770HQ, DDR4, 2x m.2 drives (2280), WiFi built-in (Specs)

• NUC8i3BEK1 BAREBONES 5x available

  • i3-8109U, DDR4, WiFi built-in (Specs)

MiniPCs & SFF

• Datto ALTO 3 V2 BAREBONES (Notes: 1,3,4,5,8,13,14,15)

  • Celeron 3865U, 32GB DDR4 max (0GB installed), 1x 2.5” SATA cable, 1x m.2 SATA (2260), m.2 slot for WiFi/BT (empty), 3x USB 3.0, 1x USB-C 3.1, 3.5mm audio (covered by case), 2x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet (Specs)
  • BT/WiFi cards available for $7 with antenna
  • Limited number of SATA cables. Without the SATA cable will be $5 cheaper
  • See below for 3D Printed bracket to fit 2280 m.2s

• Datto ALTO 2 Alternates (Notes: 1,3,5,6,9) 2x Avaialble

  • AMD E2-1800, 8GB DDR3 max (2GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x Gigabit RJ-45, 2x 3.5mm front panel (headphone & mic), eSATA port on back, SD Card reader front

• HP t520

• AMD Gx-212jc, 2x USB 3.0, 4x USB 2.0, 2x Display Port, 1x vGA, Ethernet, Mic, Headphone

• Dell OptiPlex 3020/3040 (most missing CPU fan assembly)

  • 3020: i5-4590T, 4GB DDR3 (2x 2GB), SATA, 6x USB 2.0, 1x VGA, 1x DP, WiFi/BT card installed (No 2.5 drive caddy)
  • 3040: i3-6100T, 4GB DDR3 (2x 2GB), SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
    • Replacement fan assemblies can be found on Amazon starting at $15.
    • Drive caddies can be found on Amazon starting at $8.

Chromebox

• ASUS CN62 Chromebox (Fully loaded, except NO PSU) (Notes: 1,10)
  • Celeron 3215U, 4GB DDR3 (16GB Max), 16GB m.2 SSD, WiFi/BT, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet, 3.5mm jack, SD Card slot

Other

• Samsung Galaxy Tab A8 - $150

  • Unopened in original box. 32GB variant.

• RAM

  • Check the Google Sheet for quantities, capacities, and speeds

    • SODIMM (Only available to those who buy a matching unit).

      • 2GB DDR3 [FREE]
      • 4GB DDR3 [$7]
      • 2GB DDR4 [FREE]
      • 4GB DDR4 [$7]
      • 8GB DDR4 [$12]

• Drives (Still need to update)

  • See Google Sheet for availability

• AC Adapters/PSUs

  • AC Adapters for MiniPCs – See sheet for details
  • 15x available

• WiFi/BT Cards

  • 17x m.2 A+E Cards available
  • 34x mSATA cards available
  • 7x IPEX4 MHF4 Antenna pairs available

Shipping info

• My zip is 08854. Local pickup is available.
• Everything gets packaged as securely as possible with as much recycled/reused material as possible.

General Notes

• Please see Google Sheet (#1 in TLDR) to view inventory status. If all units of a model are sold out, I will strikeout/remove that item above.

• These units are sold as-is. I cannot guarantee how long they will last. I don't know where/how all of this equipment was used. This is why I test 100% for functionality before listing them.

• I use Passmark's CPU Benchmarks to get a reference for these units. I've plugged in the CPUs of some listed above.

• User reports these units work on a wide range of voltages, perfect for battery use

• I have WiFi Antennas for the WiFi models (ALTO 2 & S3X1 WiFi) available for $3. These are the ones I got

• m.2 A+E card to Ethernet adapter works with Datto ALTO 3 V2 if you want to turn one into a router.

• Tested Adapter with RTL8125B chip.

• m.2 SATA Expander cards work with the Datto ALTO 3 V2's m.2 slot if you want to turn it into a NAS.

• Tested Expanders with both JMB575 & JMB585 chips

• All DDR3 devices will come with 2GB each unless requested otherwise.

Referenced above

1. Here's an AC Adapter I've bought works well:

   • non-affiliate Amazon link
   • If you want to get one yourself: 19V @ 3.42A with 5.5mm/2.5mm (OD/ID) w/ positive center

2. WiFi/BT m.2 I’ve been referring (non-affiliate link)

3. Datto BIOS password: R@str

4. One user reported a Celeron 3855U. I functionally test 100% of units, but not each unit's hardware specs if they are visually identical.

5. I no longer have OEM case bottoms for any Datto devices.

6. Datto ALTO 2 units lack 2.5" drive holder. 3D Printed piece will be available for $1.

7. FREE 3D PRINTED FILES. You're welcome to save a couple dollars and print these components out yourself.

   • 2.5" drive holder for S3X1/2 and ALTO 2 - Redditor /u/KeithMon created this one. I modeled the OEM drive bracket here.
   • Bottom for for S3X1/2 and ALTO 2 Units
   • Alternate case for the ALTO 3 V2 (Not my design)
   • Use 2280 m.2 drives on the ALTO 3 V2. Usually only fits 2260 m.2 drives.
   • Full Datto ALTO 3 V2 Replacement Case wihtout 2.5" drive support.
   • Full Datto ALTO 3 V2 Replacement Case with 2.5" drive support. Optional 2.5GbE add-on through m.2 A+E
   • Datto ALTO 3 V2 Replacement Case Bottom that uses 40mm screws
   • Datto ALTO 3 V2 Replacement Case Bottom that uses 20mm screws

8. Bottom case screws for the Datto ALTO 3 V2 are M2.5 x 40mm with a pan/flat head.

9. Bottom case screws for all Datto units (except ALTO 3 V2 & S4X1) are M3 thread. OEM screws have rubber heads that act as feet. I bought socket-head cap screws to use with the 3DP bottom cases which sit inside, letting the case rest directly on the surface.

10. See Mr. Chromebox for updating ChromeOS or installing Windows, Linux, or Kodi

11. WiFi Card for ALTO 3 V2. I tested one of these second hand. There are kits on Amazon that come with antennas.

12. Full 3D Printed case is available for $7.50. It's expensive but it's because I made it extra thick for strength and use heatset inserts.

13. 3D Printed case bottom only is available for $2.50 while there are half-cases available. Unless specifically requested, either the 20mm or 40mm version will be provided depending on screw availability.

TLDR:

1. Check out the inventory here and send me a PM. The Google Sheet is the Master; it stays updated with what's still available.
2. Check the RAM, Drives and PSU tabs for other components.
3. Provide serial number of item(s), paypal email address, and shipping zip code (I’m 08854, USA).
4. I will reply with the total price. If you accept, I'll send an invoice request through paypal (make sure your paypal mailing address is up to date).
5. Once paid, I will share tracking info when I ship.

***

Check out r/repurposeddattos to collaborate on these devices!

I have a new paypal so repeat buyers, don't be surprised. My main goal is to get these to people who can use them and save them from the landfill. Check out the inventory in the link above and let me know if you're interested. Some of the Datto ALTO 3 V2 units are missing SATA cables and case bottoms. I can't do anything about the cables, but I will 3D Print case bottoms for those without. Links to the .STLs are listed below for free if you want to DIY.

I have some AC adapters, RAM, and drives so you can have a complete unit shipped to you. Just pick and choose matching components from the Sheets to build it. I get these from other sources so they come and go.

Please check the very bottom of the post for answers before asking a question.

Proof 01/19/2024 ***

MiniPCs (New items and reduced prices)

• Datto ALTO 3 V2 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3,4,5,8,13,14,15) [$30-$40]

  • Celeron 3865U, 32GB DDR4 max (0GB installed), 1x 2.5” SATA cable, 1x m.2 SATA (2260), m.2 slot for WiFi/BT (empty), 3x USB 3.0, 1x USB-C 3.1, 3.5mm audio (covered by case), 2x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet (Specs)
  • Limited number of SATA cables. Without the SATA cable will be $5 cheaper
  • See below for 3D Printed bracket to fit 2280 m.2s
  • I RAN OUT OF COMPLETE OEM CASES. MUST ACKNOWLEDGE YOU WILL PRINT ONE YOURSELF OR PAY FOR A PRINTED BOTTOM/FULL CASE.

• Datto ALTO 2/Datto-1000 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3,5,6,9) [$45]

  • AMD GX-415GA, 8GB DDR3 max (0GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 2x RJ-45 Dual-Ethernet

• Datto ALTO 2 Alternate #1 (Notes: 1,3,5,6,9) QTY 2

  • AMD E2-1800, 8GB DDR3 max (0GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x Gigabit RJ-45, 2x 3.5mm front panel (headphone & mic), eSATA port on back, SD Card reader front panel

• Dell OptiPlex 3020M D08U (No PSU) See Google Sheet for specs/price

• HP t520 (No PSU) See Google Sheet for specs/price

• Dell OptiPlex 3040 & 3050 (No PSU, most missing fan assembly) QTY 9 [$20-$30]

  • 3040: i3-6100T, DDR3, SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
  • 3050: i3-6100T, DDR4, 2280 m.2, SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
  • Replacement fan assemblies can be found on Amazon starting at $15.
  • Drive caddies can be found on Amazon starting at $8.
    • If anyone wants to send me a drive caddy I'll happily reverse-engineer it and provide a printed version for much cheaper than $8 (posting the .STL for free as usual).

Chromebox

• ASUS CN62 Chromebox (NO PSU) (Notes: 1,10) [$30]
  • Celeron 3215U, 4GB DDR3 (16GB Max), 16GB m.2 SSD, WiFi/BT, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet, 3.5mm jack, SD Card slot

Other (New Items and reduced prices)

• RAM Check Google Sheet for specific speeds and brands. I will be updating the sheet today with model numbers when I can.

  • SODIMM (Only available to those who buy a matching unit).

    • 2GB DDR3 [$4]
    • 4GB DDR3 [$8]
    • 4GB DDR4 [$8]
    • 8GB DDR4 [$15]

• Drives

  • Various 120GB+ 2.5" Drives (Some Brand New in Packaging) [$11+]
  • Various 16GB-256GB m.2 (SSD & NVMe) Used [$5-$24]

• AC Adapters/PSUs

  • AC Adapters for MiniPCs – See sheet for details

• WiFi/BT Cards

  • See Google Sheet Tab for specs

• EKWB EK-Quantum Vector RX 6800/6900 GPU Water Block FREE

  • Came with other items. I don't have a GPU to test this. Looks in good shape

#Shipping info

• My zip is 08854. Local pickup is available.
• Everything gets packaged as securely as possible with as much recycled/reused material as possible.

General Notes

• Please see Google Sheet (#1 in TLDR) to view inventory status. If all units of a model are sold out, I will strikeout/remove that item above.

• These units are sold as-is. I cannot guarantee how long they will last. I don't know where they come from. I’ve said in earlier posts on reddit, I get them from a metal scrapper who doesn't know computers. This is why I test 100% for functionality before listing them.

• I use Passmark's CPU Benchmarks to get a reference for these units. I've plugged in the CPUs of some listed above.

• MiniPCs with limited components (more working units than bottom cases, 2.5" SATA cables) will be sold complete by order priority until I run out, unless requested otherwise.

• I don't have many 2.5" drive screws. Sorry.

• User reports these units work on a wide range of voltages, perfect for battery use

• The Realtek RTL8111 Dual-NIC in many of these models is compatible with FreeBSD, which means they will work with OPNsense and pfSense

• Redditor u/MrDrMrs flashed the Zotac firmware on a S3X1

• I have WiFi Antennas for the WiFi models (ALTO 2 & S3X1 WiFi) available for $3. These are the ones I got

• m.2 A+E card to Ethernet adapter works with Datto ALTO 3 V2 if you want to turn one into a router.

• m.2 SATA expander cards work with the Datto ALTO 3 V2's m.2 slot if you want to turn it into a NAS.

Referenced above

1. Here's an AC Adapter I've bought works well:

   • non-affiliate Amazon link
   • If you want to get one yourself: 19V @ 3.42A with 5.5mm/2.5mm (OD/ID) w/ positive center

2. WiFi/BT m.2 I’ve been referring (non-affiliate link)

   • Have not bought. Pulled Part No. off of Datto units with installed card. I have a couple extra listed on their own tab on the Google Sheet.

3. Datto BIOS password: R@str

4. One user reported a Celeron 3855U. I functionally test 100% of units, but not each unit's hardware specs if they are visually identical.

5. EDIT 12/20/2022 I no longer have OEM case bottoms. 3D Printed bottom covers will be available for $2.

6. Units lack 2.5" drive holder. 3D Printed piece will be available for $1.

7. FREE 3D PRINTED FILES. You're welcome to save a couple dollars and print these components out yourself.

   • 2.5" drive holder - Redditor /u/KeithMon created this one. I modeled the OEM drive bracket here.
   • Bottom for all other Datto Units
   • Alternate case for the ALTO 3 V2
   • Use 2280 m.2 drives on the ALTO 3 V2. Usually only fits 2260 m.2 drives.
   • Full Datto ALTO 3 V2 Replacement Case.
   • Datto ALTO 3 V2 Replacement Case Bottom that uses 40mm screws
   • Datto ALTO 3 V2 Replacement Case Bottom that uses 20mm screws

8. Bottom case screws for the Datto ALTO 3 V2 are M2.5 x 40mm with a pan/flat head.

9. Bottom case screws for all Datto units (except ALTO 3 V2 & S4X1) are M3 thread. OEM screws have rubber heads that act as feet. I bought socket-head cap screws to use with the 3DP bottom cases which sit inside, letting the case rest directly on the surface.

10. See Mr. Chromebox for updating ChromeOS or installing Windows, Linux, or Kodi

11. Dell WYSE BIOS password: Fireport

12. Tutorial Installing Linux on a Dell WYSE Thin Client

    • Have not attempted. Cannot confirm.

13. WiFi Card for ALTO 3 V2. I tested one of these second hand. There are kits on Amazon that come with antennas.

14. Full 3D Printed case is available for $7.50. It's expensive but it's because I made it extra thick for strength, which increases material and printing costs.

15. 3D Printed case bottom only is available for $2.50 while there are half-cases available. Unless specifically requested, either the 20mm or 40mm version will be provided depending on screw availability.

I bought this cable for an IcyDock MB699VP-B V1 only to discover by multimeter that it is missing the #PERST and #REFCLK+- pins.

I can't test it but I believe it's good for SAS4 use.

https://www.aliexpress.com/item/1005003792232466.html

Is this that something that someone will want? Or is it so niche that I'm unlikely to find a buyer? I bought it months ago so while I am waiting for a reply but it's unlikely that the seller will accept a return/refund.

TLDR:

1. Check out the inventory here and send me a PM. The Google Sheet is the Master; it stays updated with what's still available.
2. Check the RAM, Drives and PSU tabs for other components.
3. Provide serial number of item(s), paypal email address, and shipping zip code (I’m 08854, USA).
4. I will reply with the total price. If you accept, I'll send an invoice request through paypal (make sure your paypal mailing address is up to date).
5. Once paid, I will share tracking info when I ship.

***

Check out r/repurposeddattos to collaborate on these devices!

I have a new paypal so repeat buyers, don't be surprised. My main goal is to get these to people who can use them and save them from the landfill. Check out the inventory in the link above and let me know if you're interested. Some of the Datto ALTO 3 V2 units are missing SATA cables and case bottoms. I can't do anything about the cables, but I will 3D Print case bottoms for those without. Links to the .STLs are listed below for free if you want to DIY.

I have some AC adapters, RAM, and drives so you can have a complete unit shipped to you. Just pick and choose matching components from the Sheets to build it. I get these from other sources so they come and go.

Please check the very bottom of the post for answers before asking a question.

***

MiniPCs (New items and reduced prices)

• Datto ALTO 3 V2 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3,4,5,8,13) [$30-$40]

  • Celeron 3865U, 32GB DDR4 max (0GB installed), 1x 2.5” SATA cable, 1x m.2 SATA (2260), m.2 slot for WiFi/BT (empty), 3x USB 3.0, 1x USB-C 3.1, 3.5mm audio (covered by case), 2x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet (Specs)
  • Limited number of SATA cables. Without the SATA cable will be $5 cheaper
  • See below for 3D Printed bracket to fit 2280 m.2s

• Datto S4X1 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3) [$90]

  • i3-7100U, 32GB DDR4 max (0GB installed), 1x m.2 SATA, 4x USB 3.0, 1x HDMI, 1x Mini DisplayPort, 1x RJ-45 Ethernet (Specs)

• Datto ALTO 2/Datto-1000 BAREBONES (NO DRIVE, RAM, PSU) (Notes: 1,3,5,6,9) [$45]

  • AMD GX-415GA, 8GB DDR3 max (0GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 2x RJ-45 Dual-Ethernet

• Datto ALTO 2 Alternate #1 (Notes: 1,3,5,6,9) QTY 2

  • AMD E2-1800, 8GB DDR3 max (0GB installed), 1x 2.5” SATA, WiFi/BT, 1x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x Gigabit RJ-45, 2x 3.5mm front panel (headphone & mic), eSATA port on back, SD Card reader front panel

• Dell OptiPlex 3020M D08U (No PSU) See Google Sheet for specs/price

• HP t520 (No PSU) See Google Sheet for specs/price

• Dell OptiPlex 3040 & 3050 (No PSU, most missing fan assembly) QTY 9 [$30-$35]

  • 3040: i3-6100T, DDR3, SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
  • 3050: i3-6100T, DDR4, 2280 m.2, SATA, 2x USB 2.0, 4x USB 3.0, 1x HDMI, 1x DP, WiFi/BT capable (No 2.5 drive caddy)
  • Replacement fan assemblies can be found on Amazon starting at $15.
  • Drive caddies can be found on Amazon starting at $8.
  • If anyone wants to send me a drive caddy I'll happily reverse-engineer it and provide a printed version for much cheaper than $8 (posting the .STL for free as usual).

Chromebox

• ASUS CN62 Chromebox (NO PSU) (Notes: 1,10) [$30]
  • Celeron 3215U, 4GB DDR3 (16GB Max), 16GB m.2 SSD, WiFi/BT, 4x USB 3.0, 1x HDMI, 1x DisplayPort, 1x RJ-45 Ethernet, 3.5mm jack, SD Card slot

Other (New Items and reduced prices)

• RAM Check Google Sheet for specific speeds and brands. I will be updating the sheet today with model numbers when I can.

  • SODIMM (Only available to those who buy a matching unit).

    • 2GB DDR3 [$4]
    • 4GB DDR3 [$8]
    • 4GB DDR4 [$8]
    • 8GB DDR4 [$15]

• Drives

  • Various 120GB+ 2.5" Drives (Some Brand New in Packaging) [$11+]
  • Various 16GB-256GB m.2 (SSD & NVMe) Used [$5-$24]

• AC Adapters/PSUs

  • AC Adapters for MiniPCs – See sheet for details

• WiFi/BT Cards

  • See Google Sheet Tab for specs

• EKWB EK-Quantum Vector RX 6800/6900 GPU Water Block $40

  • Came with other items. I don't have a GPU to test this. Looks in good shape

• Raspberry Pi 400 $75

• Raspberry Pi Keyboard $10

#Shipping info

• My zip is 08854. Local pickup is available.
• I use USPS Priority Mail
• Everything gets packaged as securely as possible with as much recycled/reused material as possible.

General Notes

• Please see Google Sheet (#1 in TLDR) to view inventory status. If all units of a model are sold out, I will strikeout/remove that item above.

• These units are sold as-is. I cannot guarantee how long they will last. I don't know where they come from. I’ve said in earlier posts on reddit, I get them from a metal scrapper who doesn't know computers. This is why I test 100% for functionality before listing them.

• I use Passmark's CPU Benchmarks to get a reference for these units. I've plugged in the CPUs of some listed above.

• MiniPCs with limited components (more working units than bottom cases, 2.5" SATA cables) will be sold complete by order priority until I run out, unless requested otherwise.

• I don't have many 2.5" drive screws. Sorry.

• User reports these units work on a wide range of voltages, perfect for battery use

• The Realtek RTL8111 Dual-NIC in many of these models is compatible with FreeBSD, which means they will work with OPNsense and pfSense

• Redditor u/MrDrMrs flashed the Zotac firmware on a S3X1

• I have WiFi Antennas for the WiFi models (ALTO 2 & S3X1 WiFi) available for $3. These are the ones I got

Referenced above

1. Here's an AC Adapter I've bought works well:

   • non-affiliate Amazon link
   • If you want to get one yourself: 19V @ 3.42A with 5.5mm/2.5mm (OD/ID) w/ positive center

2. WiFi/BT m.2 I’ve been referring (non-affiliate link)

   • Have not bought. Pulled Part No. off of Datto units with installed card. I have a couple extra listed on their own tab on the Google Sheet.

3. Datto BIOS password: R@str

4. One user reported a Celeron 3855U. I functionally test 100% of units, but not each unit's hardware specs if they are visually identical.

5. EDIT 12/20/2022 I no longer have OEM case bottoms. 3D Printed bottom covers will be available for $2.

6. Units lack 2.5" drive holder. 3D Printed piece will be available for $1.

7. FREE 3D PRINTED FILES. You're welcome to save a couple dollars and print these components out yourself.

   • 2.5" drive holder - Redditor /u/KeithMon created this one. I modeled the OEM drive bracket here.
   • Bottom for Datto ALTO 3 V2 - Design In Progress
   • Bottom for all other Datto Units
   • Alternate case for the ALTO 3 V2
   • Use 2280 m.2 drives on the ALTO 3 V2. Usually only fits 2260 m.2 drives.

8. Bottom case screws for the Datto ALTO 3 V2 are M2.5 x 40mm with a pan/flat head.

9. Bottom case screws for all Datto units (except ALTO 3 V2 & S4X1) are M3 thread. OEM screws have rubber heads that act as feet. I bought socket-head cap screws to use with the 3DP bottom cases which sit inside, letting the case rest directly on the surface.

10. See Mr. Chromebox for updating ChromeOS or installing Windows, Linux, or Kodi

11. Dell WYSE BIOS password: Fireport

12. Tutorial Installing Linux on a Dell WYSE Thin Client

    • Have not attempted. Cannot confirm.

13. WiFi Card for ALTO 3 V2. I tested one of these second hand. There are kits on Amazon that come with antennas.